Activate Ptz Preset On Sensor - Honeywell FUSION III DVR User Manual

Activate PTZ Preset on Sensor

________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
Create a PTZ Preset Position. See instructions in the PTZ Setup chapter.
1.
2. Click the Setup button on the Display Screen.
Click the Sensor tab to open the Sensor and Output display.
3.
Click Sensor Preset.
4.
5. Select the desired camera from the Channel list.
Select the appropriate Sensor from the list.
6.
7. Select the preconfigured PTZ Preset from the list.
8. Click Set. A list of configured Sensor Presets will display in the box below.
Repeat for additional sensors.
9.
10. Click OK to close the Sensor Preset window.
Fusion III DVR User Guide
71