Honeywell FUSION III DVR User Manual page 122

Event Sentry
7.
8.
9.
Note
10. After all three filters are added save the settings. File > Save.
11. Exit the Event Sentry Management Software. File > Exit.
12. Double Click the Fusion DVR icon on the desktop to restart the DVR software.
13. The Event Sentry will run in the background and monitor the RAID array.
________________________________________________________________________________________________________
122
Select IAANTmon from the Event Source List.
Type 7 in the Event ID box.
Repeat the steps above to add two more filters: IAANTmon:4 and IAANTmon:3.
The properties for each filter will remain the same except the Event ID box, which
corresponds to the filter name.