Advertisement
PREPARATORY OPERATION
To set the current day and time
1
CLOCK ADJUST
Hold down the PROGRAM (CLOCK ADJUST) button for 2
seconds or more.
3
Reverse Advance
Press the Set Time buttons to set the current time.
Press repeatedly to adjust the current time in 1-minute increments. Press and
hold to adjust the current time in 10-minute increments.
OPERATION
G It is possible to make the operation settings for all indoor units or individual units.
To start/stop operation
* With cover closed
* With cover open
To set the operation mode
G Operation mode setting
G Room temperature setting
Raise
Lower
G Fan speed setting
En-3
ex. Monday 10:00 (24-hour display)
Press the ALL ON button or the ALL OFF button to turn on or off all registered indoor units.
ALL
ON
Press the ON/OFF button for the corresponding indoor unit.
Press the Start/Stop button for selected indoor unit(s).
OFF
ON
Press the Master Control button to set the operation mode.
AUTO
* AUTO and FAN cannot be selected for "HEAT PUMP MODELS."
* HEAT cannot be selected for "COOLING ONLY MODELS."
Press the Set Temperature buttons to set the room temperature.
Temperature setting range
AUTO ............................................................ 18 to 30 °C
COOL/DRY .................................................... 18 to 30 °C
HEAT ............................................................. 10 to 30 °C
* According to the initial setting, the heating temperature range from 10 to 15 °C
cannot be set. In addition, the temperature range from 10 to 15 °C is invalid de-
pending on the model even if it can be set.
Press the Fan Control button to set the fan speed.
AUTO
* If DRY is selected, the fan speed can be set to AUTO only.
2
DAY
S
M
SUN
MON
COOL
DRY
FAN
HIGH
MED
Press the DAY button and select the
current day.
A
appears around the selected
day.
T
W
T
F
TUE
WED
THU
FRI
4
CLOCK ADJUST
Press again the PROGRAM (CLOCK
ADJUST) button to end.
ALL
OFF
HEAT
LOW
S
SAT
Hide quick links:
Advertisement
