Download Print this page

Fujitsu UTB-Series Operating Manual page 6

Airstage air conditioner group remote controller

Advertisement

WEEKLY TIMER
G Timer setting
4
Reverse Advance
Press the Set Time buttons to set the time in 10-minute increments.
G Operating setting
5
Raise
Lower
Press the Start/Stop button or the Master Control button or the Set Temperature button to set the operation.
G Setting the next timer for the same day:
6
Then press the ENTER button to proceed to the time setting, and repeat steps from
G Repeat steps
G Setting the timer for the other indoor units:
7
8
1. Press the ENTER button to confirm the set timer.
2. Press again the PROGRAM (CLOCK ADJUST)
button to complete the weekly timer setting.
*
flashes for two seconds.
G To delete the operating time
En-5
ex. 24-hour display
No display
No setting
No display
No setting
* If all of the selected indoor units are COOLING ONLY MODELS, there is a possibility
that HEAT cannot be selected.
** If all of the selected indoor units are HEAT PUMP MODELS or if HEAT PUMP MOD-
ELS are selected with COOLING ONLY MODELS, there is a possibility that AUTO or
FAN cannot be selected.
No display
No setting
* The temperature setting ranges vary according to the operation mode and initial
setting. In addition, the temperature range from 10 to 15 °C is invalid depending on
the model even if it can be set.
TIMER-1
3
5
to
to set the timer for another day of the week.
Before setting the timer for other indoor units, press the ENTER button to confirm the
settings.
* The display switches to the next timer.
G Repeat steps
CLOCK ADJUST
1. If the Timer Mode (DELETE) button is pressed during steps
ing time for the selected day will be deleted.
* If all the days are selected, the operating times for all of the days of the se-
lected timer will be deleted.
2. Press the ENTER button to confirm the deletion.
ON
OFF
* *
AUTO
COOL
DRY
Depend on
initial setting
HEAT only
TIMER-2
2
6
to
to set the timer for other indoor units.
When the operating time is set, the
ex. TIMER-1 will start operation at 8:00 on COOL with a set-
ting of 20 °C.
* *
*
FAN
HEAT
TIMER-3
TIMER-4
4
5
to
.
mark appears.
3
to
7
, the operat-

Hide quick links:

Advertisement

loading