HP Integrity rx2800 i2 Quickspecs page 7

QuickSpecs
Configuration
Description
4-GB chip spare PC3 10600 Registered CAS9 memory module (2×2 GB DIMMs).
support double chip spare. Anytime 2GB DIMMs are installed in a system, double chip spare will not be supported.
8-GB chip spare PC3 10600 Registered CAS9 memory module (2×4 GB DIMMs)
16-GB chip spare PC3 10600 Registered CAS9 memory module (2x8 GB DIMMs)
32-GB chip spare PC3 10600 Registered CAS9 memory modeul (2x16 GB DIMMs)
6-slot Memory DIMM Riser Card. Note: Maximum of three additional (1 in base system) supported.
Server Form Factors and
Rack Configuration
The HP Integrity rx2800 i2 is a 2U server. It comes in 3 form factors: Rack-Optimized, OFS (Office Friendly
Server) and pedestal versions. The rack-optimized and OFS versions have different base model product
numbers; the rack optimized version is AH395A; the OFS version is AH396A. The pedestal version consists
of the rack-optimized version plus the pedestal foot; AM251A. The pedestal foot allows the server to be
deployed in a non-rack environment. Please note that the OFS version includes the pedestal foot.
The OFS is a pedestal form factor with reduced acoustics for workstation replacement and/or office
environments. Note that the OFS does not support redundant fans. The OFS does support redundant
power in limited configurations; 1 processor and 12 DIMMs, or 2 processors and 8 DIMMs.
In addition, the HP Integrity rx2800 i2 server offers a NEBS Level 3 DC powered option, which enables
equipment operability in network facility environments. NEBS compliance is a requirement for Telecom
Carriers and their Equipment Providers that are seeking to install equipment in central offices. They view
compliance as key to ensuring personnel safety, protection of property, and operational reliability. There
are three distinct certification levels specified in SR-3580, Network Equipment-Building System (NEBS)
Criteria Levels. All carrier-grade (CG) products released by HP are evaluated to the NEBS Level 3 criteria,
which provides the maximum assurance of equipment operability in network facility environments. The
Physical Components are described in GR-63-CORE, while the Electromagnetic Compatibility (EMC) and
Safety components are described in GR-1089-CORE.
Please note that the pedestal version does not have the reduced acoustics of the OFS version, because it is
based on the rack-optimized version. The pedestal foot is not factory installed; it comes as a kit that must
be assembled on site.
The rack mounted version of the rx2800 i2 is supported in HP 10000 Series G2 cabinets. For factory
integration order the Universal Rack Kit, AM227A, with 0D1 feature code. Sliding mounts and a cable
management arm will be installed with the server in a factory integrated rack.
The HP Integrity rx2800 i2 can be installed in the field with the Universal Rack Kit (AM227A with B01
feature code). This kit contains the slide mounts, cable management arm, and all other hardware needed
to mount an rx2800 i2 into a 19 inch cabinet.
Refer to the 10000 Series G2 Rack Best Practices Guide for information on rack deployment, stabilization,
and transportation. Go to http://www.hp.com/go/rackandpower
DA - 13770 Worldwide — Version 14 — December 10, 2013
HP Integrity rx2800 i2 Server
NOTE: 2GB DIMMs do not
for more information.
Product Number
AM229A
AM230A
AM231A
AT067A
AM246A
Page 7