HP Integrity rx2800 i2 Quickspecs page 6

QuickSpecs
Configuration
Processor Configuration The HP Integrity rx2800 i2 is a symmetrical multiprocessing (SMP) server supporting up to two high
Processor Details
Memory Configuration
Supported Memory Options
performance 64 bit Itanium processors. Processor speeds cannot be mixed within the same system.
Dual core series 9300 Itanium processors:
Dual-core 1.6-GHz with 10.0-MB Level 3 Cache 9310 processor
Quad core series 9300 Itanium processor:
Quad core 1.33 GHz with 16 MB Level 3 Cache 9320 processor
Quad core 1.60 GHz with 20 MB Level 3 Cache 9340 processor
All processors support:
Level 2 Cache: 512KB Instruction/256 KB Data per core
Level 1 Cache: 32 KB per core; 16KB (I)/16KB (D)
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
Error protection on all major data structures
Intel Hyper Threading
Intel Advanced Thermal Management (Foxton/VFM)
Intel Cache Safe Technology
The HP Integrity rx2800 i2 supports DDR (double data rate) SyncDRAM (synchronous dynamic random
access memory) DIMMs with ECC and chip spare protection. The HP Integrity rx2800 i2 supports a
maximum of twenty-four DIMM slots. The base server comes standard with 6 DIMM slots (one 6 slot
memory riser, AM246A). Up to 18 additional DIMM slots can be added by ordering up to 3 additional of the
optional AM246A 6-slot memory riser. A maximum of 384 GB is supported (24×16GB DIMMs).
Memory Loading Rules and Performance Guidelines
Memory must be installed in groups of two DIMMs, also known as pairs or modules
Each memory pair must consist of DIMMs of the same type: same capacity/density, same
organization, same number of ranks, and same speed
Memory is ordered in modules (pairs) of 4 GB (2×2GB); 8 GB (2×4GB); 16GB (2x8GB); or 32GB
(2x16GB)
Minimum memory is 4 GB (2×2GB).
NOTE: 2GB DIMMs do not support double chip spare. Anytime 2GB DIMMs are installed in the
system, double chip sparing is not supported.
Maximum memory is 384-GB, using twelve (12) 32 GB (2×16GB) memory pairs
Alternate DIMM pairs between memory risers. If both processor sockets are populated, alternate
DIMMs between processors.
For best performance, all DIMM slots should be populated with the same size DIMM.
DA - 13770 Worldwide — Version 14 — December 10, 2013
HP Integrity rx2800 i2 Server
Page 6