HP Integrity rx2800 i2 Quickspecs page 13

QuickSpecs
Configuration
HP Integrity rx2800 i2
Power Subsystem
The HP Integrity rx2800 i2 provides a high level of integrated power protection:
N+N redundant hot swap power supplies (AC or DC)
N+N redundant AC or DC power input protection with electrical phase isolation
Power monitoring and control
The HP Integrity rx2800 i2 supports a second hot swap power supply for N+N protection. One AC power
supply is shipped as a standard part of every AC system (AH395A and AH396A) and is required for correct
operation. Two DC power supplies are shipped as a standard part of every DC system (AT112A). The hot
swap design allows for the online replacement of a power supply when N+N=2 supplies are configured in
the server.
The HP Integrity rx2800 i2 provides an independent power input receptacle for each power supply
(c13/C14 type). The independent design provides protection against losing the connection from a power
cord or breaker. The HP Integrity rx2800 i2 power cords should always be plugged into separate breakers
whenever possible.
NOTE: It is highly recommended that the HP Power Advisor tool is run to determine configuration specific
power and cooling needs. The HP Power Advisor is located at:
DA - 13770 Worldwide — Version 14 — December 10, 2013
HP Integrity rx2800 i2 Server
http://www.hp.com/go/hppoweradvisor
Page 13