HP Integrity rx2800 i2 Quickspecs page 20

QuickSpecs
Technical Specifications
Supported Processors for
Field Upgrades
NOTE: Processor
frequencies cannot be
mixed within a system.
System Memory
Internal Disks
Standard Integrated I/O
wall socket. The cord that connects the system power supply to the PDU has an IEC 13
end, which plugs into the system power supply's IEC 14 socket, and an IEC 14 end, which
plugs into the PDU's IEC 13 socket. The localized cord that connects the system power
supply directly to the wall socket has an IEC 13 end, which plugs into the system power
supply's IEC 14 socket, and a country specific end, which plus into the wall socket. This
localized cord is included at the distribution site.
If the N+N power supply is ordered with the server, the additional cords will be included.
1.6 GHz Dual core Intel Itanium 9310 Processor (AH397A))
Cache - On chip Level 1
Cache - On-Chip Level 2
Cache - On-Chip Level 3
Floating point Coprocessor included
1.33 GHz Quad core Intel Itanium 9320 Processor (AH398A)
Cache - On chip Level 1
Cache - On-Chip Level 2
Cache - On-Chip Level 3
Floating point Coprocessor included
1.60 GHz Quad core Intel Itanium 9340 Processor (AH399A)
Cache - On chip Level 1
Cache - On-Chip Level 2
Cache - On-Chip Level 3
Floating point Coprocessor included
Minimum memory (2 x 2GB DIMMs)
Maximum memory capacity (24x 16GB DIMMs)
Maximum disk mechanisms
Maximum disk capacity
Serial Attached SCSI (SAS)
10/100/1000Base–TX (RJ 45 connector)
RS-232 serial port (general purpose)
10/100Base-T management port (RJ 45 connector) Included
VGA graphics
USB
DA - 13770 Worldwide — Version 14 — December 10, 2013
HP Integrity rx2800 i2 Server
32-KB (16-KB Instruction/16-KB Data)
512-KB Instruction/256-KB Data
10-MB
Yes
32 KB (16-KB Instruction/16-KB Data)
512 KB instruction/256 KB Data
16 MB 4MB per core
Yes
32 KB (16-KB Instruction/16-KB Data)
512 KB instruction/256 KB Data
20 MB (5 MB per core)
Yes
4 GB
384 GB
8
7.2 TB
8 ports
4 port
1
1 front/1 rear
2 front/2 rear
Page 20