Web Snapshots - Cisco TelePresence EX60 User Manual

Cisco TelePresence System EX60 & EX90
Table of Contents

Web Snapshots

You may gain access to your video system through
its web interface. To learn more about how to do that
consult the Administration Guide for your system. This
guide is available separately for download from www.
cisco.com.
From the web interface you may generate snapshots
of the video stream from your system. You may also,
under certain circumstances, generate snapshots
from the outgoing video of the far end system.
However, you cannot take snapshots unless you have
set the Allow Web Snapshots to ON, as shown here.
Note that the far end may take snapshots of the
outgoing video of your system, even if you have set
your system's Allow Web Snapshots to OFF.
Likewise, you will be able to take snapshots of the
outgoing video of the far end, even if the far end has
set Allow Web Snapshots to OFF, provided that you
have set your own system's Allow Web Snapshots to
ON.
Snapshots cannot be taken if the call is encrypted.
Encryption will disable the snapshot feature at both
ends, regardless of the local settings of the Allow
Web Snapshots parameter.
The web snapshot feature applies to Point-to-Point as
well as MultiSite calls (but only to unencrypted calls).
D1501601 User guide EX60 & EX90
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started Video meetings
Settings > Administrator Settings > Web Snapshots
Scheduled meetings
46
Managing Contacts The Settings
User guide
www.cisco.com