Configuration Screen - ZyXEL Communications WRE 2205 User Manual

Chapter 9 Tools
Table 22 Maintenance > Tools > Firmware (continued)
LABEL
Browse...
Upload
Note: Do not turn off the WRE2205 while firmware upload is in progress!
After you see the Firmware Upgrading screen, wait until the upgrade process is complete.
Figure 39 Firmware Upgrading
The WRE2205 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 40 Network Temporarily Disconnected
After the WRE2205 restarts, the Upgrade Accomplished screen appears.
Figure 41 Upgrade Accomplished
Refresh the web page and log in again and check your new firmware version in the Status screen.

9.4 Configuration Screen

Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
56
DESCRIPTION
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
WRE2205 User's Guide