Table of Contents
Advertisement
WARNINGS
Do not subject your printer to excessive force or shock such as treading on it, dropping it, or hitting it.
Do not install your printer in locations with poor ventilation or in locations in which the air contains salt or toxic gases.
Do not use your printer at a voltage other than the specified voltage or at frequencies other than the specified frequencies.
Only power the printer with the supplied adapter and specified battery.
Do not insert or remove the power cable or interface cable by pulling on the cable.
Do not drop or insert foreign objects like paper clips, pins, etc. into the equipment. In such case remove the object, if
accessible, or contact your reseller for help.
Do not attempt to disassemble or modify your printer. Any such unauthorized action will void the warranty and may cause a
fire hazard or electric shock.
Do not spill or spray any liquids onto the printer. In such case, immediately turn off the power, remove the power supply
cable, and contact your reseller for help.
Do not plug in your printer to a receptacle and/or power-strip with too many other devices on the same circuit.
Advertisement
Table of Contents
