Table of Contents
Advertisement
Functio
3 : Set Channel (Ad-hoc mode)
n:
1 (P1)
Parame
1 – 14: the channel # to use
ters: P1
6
Range:
The channel # to use for the 802.1 1b connectivity in
Default:
ad-hoc mode.
Descrip
<Esc>cc48,3,9,
tion:
Exampl
e:
Function:
4 : Set Encryption Mode
Parameters: 1 (P1)
P1 Range:
0: No encryption
2: WEP 64-bit encryption
3: WEP 128-bit encryption
Default:
0
Description: The encryption protocol to use for the 802.1 1b connectivity. Example:
Function:
5 : Set Encryption Key Parameters: 2 (P1, P2)
P1 Range:
1 - 4: The encryption key entry # to set
P2 Range:
(10 character hex string): the WEP 64-bit key
(0 characters): clears key
Default:
<none>
Description: Sets one of four possible encryption keys to use for the 802.1 1b connectivity. These keys must
coincide with the current WEP setting (Function #4 above), i.e. Encryption Mode set to 3 requires a 26
character string here
Example:
<Esc>cc48,5,2,"1234567890ABCDEF1234567890"
Function:
6 : Set Active Encryption Key
Parameters: 1 (P1)
P1 Range:
1 - 4: The active encryption key
Default:
<none>
Description: The encryption key to use for the 802.1 1b connectivity. This key must already be defined (Function #5
above).
Example:
<Esc>cc48,6,2,
Parameters: 1 (P1)
(26 character hex string): the WEP 128-bit key
Function:
7 : Set Secure Mode
<Esc>cc48,4,3,
Advertisement
Table of Contents
