Table of Contents
Advertisement
9.8
802.11b Wireless Network Name
ESC c c 50 , Name
Function:
2 : Set Network Name
Range:
(1 – 32 character string): desired printer identification name
Default:
"OM7212"
Description: The network name to use for identification on the 802.1 1b network.
Example:
<Esc>cc50,"MyPrinter"
9.9
Dip Switch Settings
If your printer has dip switches then the serial communication baud rate, carriage return mode, and hex dump modes
are set with the dip switches. Printers without dip switches are controlled by parameter commands.
9.9.1
Baud Rate
Configure the switches as shown to set the printer for the desired baud rate.
Baud Rate SW1
SW2
1200
ON
2400
ON
4800
ON
OFF
9600
ON
OFF
19200
OFF
38400
OFF
57600
OFF
OFF
115200
OFF
OFF
Default serial communication is N, 8, 1 (No parity, 8 data bits, 1 stop bit)
9.9.2 Reserved Switches
Switches 4- 6 are reserved and should be left in the OFF position.
9.9.3 Ignore Carriage Return Mode
Setting switch 7 to the ON position causes the printer to ignore any carriage returns sent.
SW7
ON
Ignore Carriage Return OFF Use Carriage Return
9.9.4
Hex Dump Mode
Setting switch 8 to the ON position puts the printer into Hex Dump Mode. In this mode the printer will display the data
received in hexadecimal.
SW8
SW3
ON
ON
ON
OFF
ON
OFF
ON
ON
ON
OFF
ON
OFF
ON Hex Dump Mode On OFF Hex Dump Mode Off
Advertisement
Table of Contents
