Alcatel Office 1350 Combo User Manual page 20

Using the corded base:
1. In idle mode, press <INT> and the registered handset numbers will display, along
with a "9".
2. Enter the handset number you want to call, or press "9" to call all handsets.
3. The called handset rings. Press <TALK> on the called handset to establish the
internal call.
Note: If only one handset is registered to the base station, pressing <INT> will call
the handset immediately.
4.17.2 Call All Handsets
Using a cordless handset:
1. In idle mode, press <C> and all the other registered handset numbers will display,
along with a "7" and a "9".
2. Press "9" to ring to all registered handsets and the base.
Using the corded base:
1. In idle mode, press <INT> and the registered handset numbers will display, along
with a "9".
2. Press "9" to ring to all registered handsets.
4.17.3 Transfer an External Call
Using a cordless handset:
During an external call:
Press <MENU/OK> to show INTERCOM, and then press <MENU/OK> again to
1.
display the handset numbers plus "7" and "9".
2. Enter 7 to call the base or enter the number of the handset you want to call, or enter
"9" to call all the handsets and the base. The external call is put on hold automati-
cally and the called base or handset rings.
3. Press <TALK> on the called handset to establish an internal call.
OR
3. Lift up the corded handset on the called base to establish an internal call.
4. Press <OFF> on the calling handset or put the calling handset on the charger to
end the current call with the external party.
5. The external call is transferred to the called base or handset.
Trim size: 148mm(W) x 210mm P19
20