Connecting To A Network (Lan); Required System - Denon DN-700C Owner's Manual

Connecting to a network (LAN)

You can connect this unit to your network (LAN) to perform various types of playbacks and operations as
follows. Make network connections for this unit by carefully reading information on this page.
• Streaming playback of tracks from a media server on the network
• Control of the DN-700C via the network
Network settings need to be configured after the network (LAN) is connected. For details, see "Network
Settings" (vpage 31).
Modem
Internet
To WAN
To LAN side port
To LAN side port
Router
Media server, NAS
(Network Attached Storage)
Computer
LAN port/
LAN port/Ethernet
Ethernet
terminal
terminal

Required system

n Ethernet cable (CAT-5 or greater recommended)
• Use only a shielded STP or ScTP LAN cable which is available at retailer.
• The normal shielded-type Ethernet cable is recommended. If a flat-type cable or unshielded-type cable
is used, other devices could be affected by noise.
• When using this unit connected to a network with no DHCP function, make the settings for the IP
address, etc., at "System Setting" (vpage 18).
• When setting manually, check the setting contents with the network administrator.
NOTE
DENON assumes no responsibility whatsoever for any communication errors or troubles resulting from
customer's network environment or connected devices.
30