Table of Contents
Advertisement
Connecting to a network (LAN)
• This unit lets you play via your network (LAN) music files stored on a
computer and music content such as that from Internet radio.
• You can update by downloading the latest firmware from the D&M
Professional website.
For more information, see "Firmware Update" (vpage 34).
• See "Setting the network [Network]" (vpage 29) for more
information on network setting.
Cables used for connections
Cable (sold separately)
Ethernet cable
Modem
Internet
Router
To WAN side
To LAN port
To LAN port
For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.
Required system
n Broadband internet connection
n Modem
Device that connects to the broadband circuit and conducts
communications on the Internet.
A type that is integrated with a router is also available.
n Router
When using this unit, we recommend you use a router equipped
with the following functions:
• Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
Computer
• Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
n PC
• Windows XP Service Pack2
• Windows Vista
• Windows 7
• 1 GHz processor or higher
(32 bit or 64 bit Intel or AMD processor etc.)
LAN port/
n Internet browser
Ethernet
connector
Microsoft Internet Explorer 6.0 or higher
n Ethernet cable (CAT-5 or greater recommended)
• Use only a shielded STP or ScTP LAN cable which is available at
retailer.
• Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
• If you have an Internet provider contract for a line on which network
settings are made manually, make the settings at "Network connecting
(when "DHCP" settings are "Off")" (vpage 29).
• With this unit, it is possible to use the DHCP and Auto IP functions
to make the network settings automatically.
• When using this unit with the broadband router's DHCP function
enabled, this unit automatically performs the IP address setting
and other settings.
When using this unit connected to a network with no DHCP function,
make the settings for the IP address, etc., at "Network connecting
(when "DHCP" settings are "Off")" (vpage 29).
• When setting manually, check the setting contents with the
network administrator.
NOTE
• A contract with an ISP is required to connect to the Internet.
• No additional contract is needed if you already have a broadband
connection to the Internet.
• The types of routers that can be used depend on the ISP. Contact an
ISP or a computer shop for details.
• Depending on the condition of your Internet connection, the sound
may cut out during playback, or operations may become unstable.
• D&M Professional assumes no responsibility whatsoever for any
communication errors or troubles resulting from customer's network
environment or connected devices.
• This unit is not compatible with PPPoE. A PPPoE-compatible router
is required if you have a contract for a type of line set by PPPoE.
• Do not connect an LAN connector directly to the LAN port/ Ethernet
connector on your computer.
• To listen to audio streaming, use a router that supports audio
streaming.
• If you cannot connect to Internet radio or a music server, your
Internet connection may have network security restrictions. Contact
your network administrator.
EnGlisH
7
Advertisement
Table of Contents
