Playback From The Main Screen - Denon DN-700C Owner's Manual

Playback from the main screen

F1 - 4
Jog Dial
n Before playback
After connecting the DN-700C to the RC-F400S, turn the
power switch on for the respective devices.
• The RC-F400S display shows the startup screen "DENON
PROFESSIONAL".
• When the startup is completed, the file information is shown in
the display.
n Play back
1 3
Press / .
The button lights green and file playback starts.
n Pause
1 3
Press / during playback or search modes.
• 1/3 flashes during pause.
• To restart playback, press 1/3.
n CUE
Press 20 .
n STOP
20
Press during stop.
n Repeat playback (0.5 sec)
Press FRAME.
n Switching files (
Power Switch
During playback or stop, rotate the jog dial.
• Rotate clockwise to switch to the next file.
• Rotate counterclockwise to switch to the beginning of the current
file or the previous file.
• To switch to the previous file, rotate the jog dial counterclockwise
within one second from the start of file playback.
n Fast forward or fast rewind (search)
During playback, press
• Press 7 to perform fast forward playback.
• Press 6 to perform fast rewind playback.
• The fast forward/fast rewind speed changes in the order shown
below each time the button is pressed.
• CD-DA: x2, x5, x10, x20, x50
• Others: x2, x10, x50, x100, x200
• If the "Search Mode" settings in the "Preset Menu" of the DN-700C
are set to "Normal", sound is output when the search speed is 2x.
Please note that sound is not output at search speeds above 2x.
• After you fast forward to the end of the last file or fast rewind to the
beginning of the first file, the unit pauses.
• When you fast rewind to the beginning of the file, the fast rewind
operation continues from the end point of the previous file.
/ )
8 9
7 or 6 .
46
Various playback functions with RC-F400S
NOTE
• When you perform search on a short file, the indicated speed may
not be available.
• You cannot perform search on files that are recorded in VBR.
• If searched files contain a VBR file, the search stops at that VBR file.
n Jump by frames (Frame Accurate Search)
Press 7 or 6 during repeat playback.
• Pressing 7 moves 1 frame in the forward direction.
• Pressing 6 moves 1 frame in the reverse direction.
n AUTO CUE
AUTO CUE automatically detects the audio level and performs the
cue operation.
• When AUTO CUE is enabled, the playback mode display in the
RC-F400S display shows .
• The detected level is the set value for the preset menu "Auto
Cue" in DN-700C (vpage 16).
• If the audio level is not detected for 20 seconds or more after the
playback for automatic detection of the audio level has started,
the cue operation is performed at the beginning of the file.