Operations - Denon DN-700C Owner's Manual

Operations

n Password Settings
The first time Product Manager is launched, the password setup
screen is displayed.
• Alphabetic characters (large and small case), numbers, hyphen
and under bar can be used in the password.
• Set a password that is between 6 to 12 characters in length.
• Use "Setup Password" in the menu to reset passwords.
GPassword Setting ScreenH
Please Setup Passwords
Input NEW password
Re-Input NEW password
OK
n Password Input
When a password has been set, a password entry screen is
displayed on the second and subsequent times the software is
launched.
GPassword Entry ScreenH
Please Setup Passwords
Password
OK
Menu Item
Quit
Setup power
sequence
Setup Password
Refresh
Browser
Version
Cancel
Cancel
Description
Quits the application.
Sets the timing between groups for the
Power ON/OFF sequence group.
Open the setting window to configure the
settings.
The password setup screen appears and
passwords can be setup.
Updates the Device List and Window
display.
Displays the web browser at the side of the
Product Manager main window. The Control
Screen (Web remote) is displayed when a
DENON product is selected in the Product
Manager window.
The version of this application is displayed.
D&M Pro Control
Version a.b.c.ddddd
Copyright D&M Holdings Inc.
34
Other Functions (Product Manager)
Properties Window
• Click the Properties button to display the window below and
configure power control settings.
Properties
Power ON Group no.
q
Power OFF Group no.
w
Ignore All OFF
Yes No
e
OK Cancel
r
Setting window
The batch power ON and batch power OFF settings can be grouped,
and intervals between the groups specified.
Select Menu - setup to open a different window for configuring
settings.
Power Sequence
Power ON sequence Power OFF sequence
Group1 Group1
1.2 sec 5.6 sec
Group2 Group2
3.4 sec 7.8 sec
Group3 Group3
OK Cancel
q
w
e
r