Printing Labels
Printing Labels with Serialized Objects
Printing Labels with Serialized Objects
5-4
Use this procedure to print labels that contain a serial object. If your label does
not contain a serialized object, see "Printing Labels without Serialized Objects" on
page 5-3.
Note: You can only select one set of copies when printing labels that contain
serialized objects. However, If the label includes more than one serial object, the
option to "print all labels" results in one complete set of the labels generated from
the serial object that prints the most labels; the shorter series will repeat until the
longer series is completed.
To print labels with serialized objects:
1. With a serial label in the Editor, select Print
2. From the Print dialog box, select the print options:
•
Labels to print (print all labels, or select a range of labels to print)
•
Mirror
•
Preview
•
Print energy (accessed from the Advanced Settings button)
•
Adjust Offset (accessed from the Advanced Settings button)
3. Select Start Print
to start printing the labels.
®
BBP
.
85 Label Printer User's Manual