Table of Contents
Advertisement
Wall Mounting Your Outdoor
WiFi Router
Locate your mounting bracket, mounting bracket screws, wall mount screws, and grey wall plugs.
1.
Before you start make sure all cables have been disconnected from your Outdoor WiFi Router
and that your antennas have been attached and your SIM card is inserted.
2.
Align the mounting bracket horizontally to the desired position on the wall.
3.
Make sure you have at least 60 cm clear space around the centre of the mounting bracket
60cm
4.
Use a pencil or piece of chalk to mark the holes on the wall
5.
Remove the mounting bracket from the wall
6.
Using your drill and a 6 mm drill bit to drill the holes in the wall where you marked previously.
NOTE: Before drilling into your walls ensure you are not drilling into an area with electrical
wiring, a circuit or wire tracer can help you find these. If you are unsure consult a
professional installer.
NTC-30 Series - Outdoor WiFi Router
17
Advertisement
Table of Contents
