Model Description; All Models; Fdw-1-Mn Model; Fst-1-Mn Model - Hatco MACHO NACHO FDW-1-MN Series Installation And Operating Manual

MODEL DESCRIPTION

ALL MODELS

The Hatco Macho Nacho ™ Chip Warmer is a
high-visibility merchandiser for warming and displaying
nacho chips. The unique air flow forces warm air
to the bottom and is distributed into the cabinet through
holes in the floor panels directing maximum heat
to the chips being served. Air is circulated to prevent
the loss of natural oils, eliminating the need
to frequently replace stale chips.
Macho Nacho two-door access permits easy loading
and serving. Chips flow to the front of the cabinet when
loading through the upper door and heated, slanted floor
panel slides the hot chips back to the lower door
for serving.
Figure 1. FDW-1-MN Macho Nacho Chip Warmer
The user-friendly control panel makes it easy
to operate and only minimum maintenance is required.
The chip slide and floor panels are removable for ease
of cleaning.

FDW-1-MN MODEL

The FDW-1-MN Model is built of stainless steel
with tempered glass sides and doors. The unit holds
up to 25 lbs. (11 kg) of chips.

FST-1-MN MODEL

The FST-1-MN Model is built of stainless steel
and aluminum with tempered glass sides and doors.
An anodized bronze exterior is standard. The unit holds
up to 40 lbs. (18 kg) of chips.
Figure 2. FST-1-MN Macho Nacho Chip Warmer
Form No. MNM-0702 2