Channel List; Navigating Channel List; Deleting Channel; Edit Channels - Sharp TU-R252H Operation Manual

1. CHANNEL LIST

Channel list is the place where the
channels are managed. The following
operations can be performed in this menu:

1. Navigating channel list

2. Deleting channels
3. Renaming channels

4. Adding locks to channels

5. Setting favourite list
1.1. NAVIGATING CHANNEL LIST
In the channel table "5/6" moves the
selection to the previous or next .To exit
the menu and watch a specific channel,
highlight it using, "5/6" then press OK
while the "SELECT" option at the bottom of
the screen is highlighted. If the selected
channel is password protected then a pop up menu is displayed. If the correct code is entered, the
selected channel can be watched. You can now select another channel in the list. The scroll Bar in
middle of the screen shows relative position of the currently visible channels with respect to the whole
list.

1.2. DELETING CHANNEL

To delete a channel highlight it using "5/6", then highlight "Delete" using "3/4" and press "OK". A
message is displayed to confirm your decision, if you still want to delete select "YES", using "3/4",
or you can cancel the operation if you select "NO".

1.3. EDIT CHANNELS

To rename a specific channel, highlight "Edit Name" after the channel is selected and press OK. A box
appears on the screen. "3/4" moves to the previous/next character. "5/6" toggles the current
character, i.e., 'b' character becomes 'a' on "6" and 'c' on "5". Pressing the numeric buttons '0...9'
replaces the highlighted character with the characters printed above the button one by one as the
button is pressed. Pressing BACK cancels the editing and OK saves the new name.
1.4. ADDING LOCKS TO CHANNELS
Channel Locking provides a password-protected access to channels selected by parents. In order to
lock a channel you should know the parental Lock password (set to 0000 in the factory and can only
be changed from the Configuration Menu), from the channel list menu highlight the channel to be
locked and select "Lock" using "3/4" (For more information, please refer to section 6.2.10). When OK
is pressed a password box is displayed. Enter the parental Lock code, press OK and the Lock icon will
be displayed in front of the selected channel. Repeat the same operation to cancel the Lock.
13