Sharp HS-DM4062 User Manual

Digital video recorder


Quick Links

Thank you for purchasing our product.
Please read this User's Manual before
using the
Change without Notice
Audio input x 4
Dual monitor output

Digital Video Recorder

User's Guide


Table of Contents

Summary of Contents for Sharp HS-DM4062

  • Page 1: Digital Video Recorder

    Thank you for purchasing our product. Please read this User’s Manual before using the product. Change without Notice Digital Video Recorder User’s Guide SATA HDD x 2 Audio input x 4 Dual monitor output...
  • Page 2 Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVE R (OR BACK), NO USER SERVICEABLE PARTS REFE R SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous Voltage within the product’s enclosure that may be sufficient magnitude to constitute risk of electrical shock to persons.
  • Page 3 About this document Before installing stand alone DVR, be sure to thoroughly review and follow the instructions in this Users Manual. Pay particular attention to the parts that are marked NOTICE. Also, when connecting with external application, first turn the power OFF and follow manual instruction for appropriate installation.
  • Page 4 FCC Statement: WARNING This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation."...
  • Page 5: Front Panel

    FRONT PANEL Please operate the keypad function according to the DVR model that you purchased 4CH DVR : Quad screen mode button CHANNEL 1 : Channel 1 full screen button CHANNEL 2 : Channel 2 full screen button CHANNEL 3 : Channel 3 full screen button CHANNEL 4 : Channel 4 full screen button...
  • Page 6 Miscellaneous LOCK : Press this button to Key Lock function AUDIO : Audio on or off button AUTO : Auto sequence mode BACKUP : Image backup button 10. UP / STOP : Direction button UP / Playback stop button 11. DOWN / PAUSE : Direction button down / Playback pause (Step play) 12.
  • Page 7: Rear Panel

    REAR PANEL Power code in 12V/5A, power switcher (ON / OFF) 4CH DVR Camera 1 ~ 4 input BNC type 8CH DVR Camera 1 ~ 8 input BNC type Monitor out VGA out (Optional) Audio channel input x 1 and output x 1 Alarm / Relay / RS 485 connector RJ-45 (Network connector) PS 2 type mouse connector...
  • Page 8: Menu Button

    System Operate: 1. NTSC / PAL auto detect is the default. Please power on DVR after camera 1 install. 2. Please set HDD to Master on PCB if only one is installed. 3. Press PLAY to format if a new hard disk is detected. Screen display 1.
  • Page 9 Main Menu – Record Setup Notice: 1. Frame rate adjustable under each mode per channel. 2. In 24 hours, user can adjust each channel frame rate of different record mode. Such as schedule, motion detection, and alarm record more. 3. Press button to change different of record modes.
  • Page 10 Main Menu – System Set – Network Settings Network Settings – Local IP 1. Select STATIC / PPPOE / DHCP connection type 2. DNS only works under DDNS mode. If the DVR is under a network system, suggest enable MENU – SYSTEM – TIME SETUP- NTP server to get a network request automatically.
  • Page 11 Main Menu – Search – Time Search: after date and time select, go to Search and then press ENTER to start playback. Main Menu – Search – Event List Select an event item of lists and then press ENTER to start to play. “*”...
  • Page 12 Backup mode: Before backup, USB pan driver is required. Back up file size can not exceed 1GB, when system reads USB (thumb driver only) device 128MB USB, the system will stop recording about 2 seconds. On live mode, press backup button to file backup page. Total hard disk date &...
  • Page 13 DVR is reading pan driver After a while, all backup information display on screen, user now can press backup button to start file backup. Data is writing to USB pan drive, users please wait until backup complete. Press menu button to quit USB page.
  • Page 14 Main Menu – System Set – RS-485 This page is for control keyboard connection. Please choose baud rate and ID. DVR maximum amount ID is 16 Other settings just leave them as default Main Menu – System Set – Pan/Tilt Device Control: Keypad, mouse * Mouse control: press ESC to PTZ mode, press AUTO button, and then once-click left button of mouse to control PTZ movement.
  • Page 15 Net viewer • ‚ ‡ ˆ ƒ „ … † Viewer function: 1. Backup file player 2. Network viewer 3. Connection DVR control via viewer:* 4. DVR screen: Split, Channel full screen / Key lock / Channel auto sequence. Audio ON : stream speed – not good. OFF : stream speed – good 5.
  • Page 16 IE browser: IE control button is same as DVR keypad. 1. Before DVR IE connection, please download the NTVIEWER.exe to DVR hard disk from CD-ROM, or you can download from server of internet and then you can view DVR image via internet any PC.

This manual is also suitable for:


Table of Contents