Menu Interface; First Time Installation; Main Menu - Sharp TU-R252H Operation Manual

MENU INTERFACE

FIRST TIME INSTALLATION

When the box is switched on from stand-by mode and if there is no channel stored in the database,
First Time Installation Menu window is displayed on the screen. In this window, set the TV type with
"3/4" buttons and press OK to continue.
The next menu will ask you to choose the HDMI resolution. If you intend just using the Scart output
then just press OK and continue the scanning process.
Using the [LEFT] or [RIGHT] buttons on the remote control, you can select between 576p, 720p and
1080i. Please check the HDMI resolutions supported by your TV set and select the most appropriate
one from this menu.
The next menu will ask you, if you want to begin with the automatic channel scan. To confirm
automatic channel scan, use the "3/4" buttons, highlight YES and press OK to continue. The unit will
start searching for channels.When the automatic channel scan is completed, the unit will switch to PR
1.
CAUTION - Do not press any buttons on the remote control or front panel display during automatic
channel search.

MAIN MENU

The main menu is accessed by pressing "MENU" on the remote control.
You can navigate the menu using the "5/6" buttons on the remote
control. To activate the menu selection, press the OK button on the
remote control. Press "BACK" on the remote control to exit the selected
menu. In most menus, there is an information banner at the bottom of
the screen. These are functions that can be applied in the menu.
12