Table of Contents
Advertisement
MENU INTERFACE
FIRST TIME INSTALLATION
When the box is switched on from stand-by mode and if there is no channel stored in the database,
First Time Installation Menu window is displayed on the screen. In this window, set the TV type with
"3/4" buttons and press OK to continue.
The automatic channel scan window appears.
To confirm automatic channel scan, use the "3/4" buttons, highlight YES and press OK to continue.
The unit will start searching for channels.When the automatic channel scan is completed, the unit will
switch to PR 1.
CAUTION - Do not press any buttons on the remote control or front panel display during automatic
channel search.
MAIN MENU
The main menu is accessed by pressing "MENU" on the remote control.
You can navigate the menu using the "5/6" buttons on the remote
control. To activate the menu selection, press the OK button on the
remote control. Press "BACK" on the remote control to exit the selected
menu. In most menus, there is an information banner at the bottom of
the screen. These are functions that can be applied in the menu.
1. CHANNEL LIST
Channel
list
is
where
channels
are
managed. The following operations can be
performed in this menu:
1. Navigating channel list
2. Deleting channels
3. Renaming channels
4. Adding locks to channels
5. Setting favourite list
12
Advertisement
Table of Contents
