Check Conflicts; Set Reminder / Delete Reminder; Split Record - Sharp TU-R252H Operation Manual

The individual events carrying programmes that comprise a series are also identified by Broadcaster.
If the DTR does not show the series record option and just sets a single record for any programme,
the programme has no identified series record data sent by Broadcaster.
Following programmes of any selected programme as series are automatically added to the Timers
menu day by- day.
Sharp recommend you can check this menu regularly to ensure the series recording is continuing.

2.1.4. CHECK CONFLICTS

A conflict is caused, if more than two programmes are set for recording in the same time interval or if
two reminders have the same starting time (For more information, please refer to section 2.1.7.). In the
EPG menu, press OK. In the following window, select the option "Check Conflicts" and press again
OK. You will enter the "Too Many Timers" window.

2.1.5. SET REMINDER / DELETE REMINDER

In EPG menu, after you have selected a programme, press OK and select the "Set Reminder" option
in the menu which appears and press OK again. You can set a reminder for future programs.
To cancel an already set reminder, highlight that programme and press OK and select the option
"Delete Reminder". The reminder will be cancelled.

2.1.6. SPLIT RECORD

If you select a programme to be recorded, with this feature, if there is another part of the programme
available, it will also be set automatically to be recorded. For example in the following picture you see
the programme with a red underline and the following episode is also underlined. To perform this
function, you only have to press RECORD once.
Note: Split programme information is broadcasted by the broadcaster. If the "Split Record" feature is
unavailable, this is not a fault with your unit.
16