Getting Started; Connection Diagrams - Sharp TU-R252H Operation Manual

GETTING STARTED

Connect all cables before plugging in to mains. When the Digital TV Recorder is first powered up,
please wait for a while before activating the receiver since booting of software will take some time.
Then, the unit enters first time installation.
"NOTE" - When the unit is first powered up, please wait for a short while as the unit's software needs
to be initialised and the harddisk is checked.
The unit is equipped with output terminals that support HDMI, RGB, S-video and CVBS video signals.
The image quality is highest in the order of - HDMI signal, RGB signal, S-video signal and the CVBS
video signal

CONNECTION DIAGRAMS

TV Aerial
LOOP THROUGH
A N TEN N A 2 A N TEN N A 1
IN IN
A N TEN N A 2 A N TEN N A 1
O U T O U T
NOT SUPPLIED
TV
NOT SUPPLIED
DO NOT REMOVE
A U X SC A R T
TV SC A R T
H D M I O U T
SUPPLIED
9
VCR
LEFT
O PTIC A L O U T
R IG H T C VB S
NOT SUPPLIED
Aux Aux
HI-FI
HI-FI
R S 23 2
A C IN
AC3 DIGITAL
AMPLIFIER