Menu Interface; First Time Installation; Main Menu; Channel List - Sharp TU-R160HA Operation Manual

MENU INTERFACE

FIRST TIME INSTALLATION

When the unit is operated for the first time or if there is no channel stored in the database, "First Time
Installation" Menu window is displayed on the screen. In this window, set the TV type with "3/4" keys
and press OK to continue.
The automatic channel scan window appears.
To confirm automatic channel scan, use the "3/4" keys and press OK to continue.
The unit will start searching for channels.When the automatic channel scan is completed, the unit will
switch to PR 1.
CAUTION - Do not press any buttons on the remote control or front panel display during automatic
channel search.

MAIN MENU

The main menu is accessed by pressing the "MENU" key on the remote
control.
You can navigate the menu using the "5/6" keys on the remote control. To
activate the menu selection, press the OK key on the remote control. Press
"BACK" on the remote control to exit the selected menu. In all menus there is
an Info banner located at the bottom of the screen. These are functions that
can be applied in that menu option.

1. CHANNEL LIST

Channel list is the place where the
channels are managed. The following
operations can be performed in this menu:
1. Navigating channel list
2. Deleting channels
3. Renaming channels
4. Adding locks to channels
5. Setting favourite list
11