Activate An Approach In The Active Flight Plan; Activate A Vector To Final Approach Fix - Garmin DA42 G1000 Cockpit Reference Manual

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'SELECT APPROACH'.
3) Press the ENT Key. A list of available approaches for the destination airport
is displayed.
4) Turn either FMS Knob to highlight the desired approach.
5) Press the ENT Key. A list of available transitions for the selected approach
procedure is now displayed.
6) Turn either FMS Knob to select the desired transition. The "Vectors"
option assumes vectors will be received to the final course segment of
the approach and will provide navigation guidance relative to the final
approach course.
7) Press the ENT Key. 'LOAD? or ACTIVATE?' is now displayed with 'LOAD?'
highlighted.
8) Turn the large FMS Knob to select either 'LOAD?' or 'ACTIVATE?'.
Selecting 'LOAD?' enters the selected approach procedure into the active
flight plan, but is not currently active. Selecting 'ACTIVATE?' enters the
selected approach procedure into the active flight plan and is immediately
activated.
9) Press the ENT Key.

ACTIVATE AN APPROACH IN THE ACTIVE FLIGHT PLAN

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE APPROACH'.
3) Press the ENT Key.

ACTIVATE A VECTOR TO FINAL APPROACH FIX

1) Press the PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE VECTOR-TO-FINAL'.
3) Press the ENT Key.
4) The final approach course becomes the active leg.
190-00406-06 Rev. A Garmin G1000 Cockpit Reference Guide for the DA42
Procedures
33