Enter An Airway In A Flight Plan; Invert An Active Flight Plan; Remove A Departure, Arrival, Approach, Or Airway From A Flight Plan - Garmin DA42 G1000 Cockpit Reference Manual

Flight Planning

ENTER AN AIRWAY IN A FLIGHT PLAN

1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Turn the large FMS Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
4) Turn the small FMS Knob one click clockwise and press the LD AIRWY
Softkey, or press the MENU Key and select "Load Airway". The Select
Airway Page is displayed. The LD AIRWY Softkey or the "Load Airway"
menu item is available only when an acceptable airway entry waypoint has
been chosen (the waypoint ahead of the cursor position).
5) Turn the FMS Knob to select the desired airway from the list, and press the
ENT Key. Low altitude airways are shown first in the list, followed by "all"
altitude airways, and then high altitude airways.
6) Turn the FMS Knob to select the desired airway exit point from the list, and
press the ENT Key. 'LOAD?' is highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the
new airway inserted.

INVERT AN ACTIVE FLIGHT PLAN

1) Press the FPL Key to display the active flight plan.
2) Press the MENU Key to display the Page Menu.
3) Turn the large FMS Knob to highlight 'Invert Flight Plan'.
4) Press the ENT Key. The original flight plan remains intact in its flight plan
catalog storage location.
5) With 'OK' highlighted, press the ENT Key to invert the flight plan.
REMOVE A DEPARTURE, ARRIVAL, APPROACH, OR AIRWAY FROM A FLIGHT
PLAN
1) Press the FPL Key to display the active flight plan. Press the FMS Knob to
activate the cursor.
26
Garmin G1000 Cockpit Reference Guide for the DA42
190-00406-06 Rev. A