Garmin DA42 G1000 Cockpit Reference Manual page 88

Appendix
XPDR
STBY
ON
ALT
GND
VFR
CODE
IDENT
72
Garmin G1000 Cockpit Reference Guide for the DA42
ADF/DME
Transponder Softkeys
Displays transponder mode selection softkeys
Selects Standby Mode (transponder does
not reply to any interrogations)
Selects Mode A (transponder replies to
interrogations)
Selects Mode C – Altitude Reporting Mode
(transponder replies to identification and
altitude interrogations)
Manually selects Ground Mode, the
transponder does not allow Mode A
and Mode C replies, but it does permit
acquisition squitter and replies to discretely
addressed Mode S interrogations.
Automatically enters the VFR code (1200 in
the U.S.A. only)
Displays transponder code selection
softkeys 0-7
0 — 7 Use numbers to enter code
BKSP Removes numbers entered, one at a time
Activates the Special Position Identification
(SPI) pulse for 18 seconds, identifying the
transponder return on the ATC screen
ALERTS
ALERTS
Press the BACK Softkey to return
to the top-level softkeys.
ALERTS
Press the BACK Softkey to return
to the previous level softkeys.
190-00406-06 Rev. A