Information Menu - Meridian D-ILA1080MF1 User Manual

Information menu
Options under this menu show information only: no settings are available.
Option Description
Lamp Time Displays the accumulated hours of usage of the light-source lamp.
Source Automatically identifies the input video signal at the projector's DVI input,
1080p50
and displays the signal name (
• No signal name will be displayed when no signal is present, or if the
signal is not one of the above types (
the latter case).
Note:
When the input video signal is switched, a blue screen will appear for
about 2 seconds. When nothing is connected to the [DVI] terminal, or if there
No Signal DVI-D
is no video signal, a
case of a video signal that cannot be used with this unit, an
message will be projected. Video input signals that can be used with this unit
are 1080/50p and 1080/60p signals via the DVI-D input.
Option
Control panel
indicators
1080p60
or ).
Out of range
will be displayed in
message will be projected. In the
Out of Range
Description
Note:
Cool Down Mode
After projection, the hot lamp goes through a 60-second cool-down process
known as 'cool down mode'. This mode is designed to prevent damage
and deformation that heat from the heated lamp may cause to the internal
components of the projector. It also minimises the chance of lamp breakage
and shortened lamp life.
The cool down mode is indicated by the blinking
OPERATE ON
in the cool down mode, is disabled.
After the cool down process is completed, the unit will automatically switch
into standby mode.
CAUTION:
When in the cool-down mode, do not pull out the plug from the
power socket. Also, do not block the air inlets/ exhaust vents by standing this
unit on its end or laying it on its side.
O p e r a t i n g t h e
d i g i t a l v i d e o
p r o j e c t o r
STANDBy indicator. When