Operating The Projector; Controls - Front, Top, And Underside - Meridian D-ILA1080MF1 User Manual

Operating the projector
This chapter explains how to operate the DVP1080MF Digital Video Processor using the Faroudja remote
control.
Controls – front, top, and underside
A
F
B
C D E
A: Indicators
Please refer to Indicators , page 12, for details.
B: Air Inlets
(2 in front and 1 at bottom surface)
The air inlets absorb air to cool the interior of the unit. Do not block or allow warm air to
blow into them. This may cause the unit to malfunction.
C: Power Zoom Lens
1.9x Normal power zoom lens
(model DILA1080MF1)
1.4x Short-throw power zoom lens
(model DILA1080MF1S)
Before projection, remove the lens cap.
G
H
B
G
D: Remote Sensor
When operating with the remote control, aim it towards the sensor. Also see Digital video
projector operation , page 13.
E: Lens Cap
Fit the cap on the lens when this unit is not in use.
F: Lens Shift Cover
Remove this cover when using the Lens Shift feature for shifting the projecting position in
the vertical direction.
G: Foot
It is set at the lowest position when shipped from the factory. This unit does not come with
a function to adjust the gradient.
H: Filter
Cleans air drawn in from the air inlet. Please clean this filter regularly; see Cleaning and
replacing the filter , page 24.

O p e r a t i n g t h e
d i g i t a l v i d e o
p r o j e c t o r