Precautions Against Fire And Electric Shock - Meridian D-ILA1080MF1 User Manual


I n s t a l l i n g t h e
d i g i t a l v i d e o
p r o j e c t o r
To connect to a computer or home automation system via RS232
It is possible to control this unit by connecting a computer to the RS232C port at the rear
of this unit. Use a crossover cable for this purpose.
For details, please consult your authorized dealer.
To connect power
Before plugging in the power cable/cord, ensure that all devices have been connected.
Projector
RVICE RS-232C DVI
RS-232C Connection Cable
(Cross Cable)
Power Cable (supplied)
• Connect the supplied power cable to the power input terminal of this unit
• Connect the earth wire to the earth terminal available in the building, followed by
inserting the mains plug of the supplied power cable into the wall outlet
Precautions against fire and electric shock
• Since the power consumption of this unit is high, insert the power plug directly into a
wall outlet and not into a multiway adaptor.
• When not using devices, remove the power plug from the wall outlet.
• Do not use power cords for connection other than those supplied.
• Do not use a power voltage different from that which is indicated.
• Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat
or stretch the power cords as this may cause damage to the cords.
• Do not insert or pull out plugs with a wet hand.