O p e r a t i n g t h e
d i g i t a l v i d e o
p r o j e c t o r
Indicators
A: STANDBy indicator
Light on: Unit is in standby mode.
Blinking: Unit is cooling down.
B: OPERATE indicator
Light on: Illuminated when unit is currently operating (projecting).
C: LAMP indicator
Light on indicates that:
• the lamp needs to be replaced soon or immediately;
• the lamp cover is removed;
• the lamp has failed and the unit is unable to project; or
• when the lamp fails during projection.
D: TEMP indicator
Light on: The internal temperature of the unit is abnormally high.
Blinking: The lamp needs to be replaced soon or immediately, or a failure has occurred in
the unit.
E: FAN indicator
Light on: The internal fan has unintentionally stopped running.
STANDBY
Blinking: The lamp has reached the end of its life and it is time to replace the lamp, or a
A
failure has occurred in this unit.
OPERATE
F: HIDE indicator
B
Light on: The video image has been temporarily cleared by pressing the HIDE button.
LAMP
C
Blinking: A fault has occurred.
TEMP
D
FAN
E
HIDE
F