5.4 Projector rotation
5.5 Ceiling mount
95
59,5
82,5
53
500mm
Ceiling Mount Interface
M6 Threads
510
163,3
23
Always operate the projector horizontally, within the range of the adjustable front and rear
feet. The projector may be rotated so that the lens points downwards. It may not be rotated
around the through-the-lens axis.
Operating the unit in other positions may reduce lamp life significantly, and may lead
to overheating, finally resulting in malfunctioning.
The projector can be ceiling mounted using an approved UL tested/ listed ceiling mount
fixture, with a capacity of minimum 60 kg / 130 lbs. For ceiling mount use M6 screws that
penetrate maximum 15 mm / 0.6" into the projector body. Figure 5-2. Ceiling mount, gives
detailed information about the alignment of the ceiling mount screw holes in the
projector.
For proper ventilation the minimum distance from ceiling/ rear wall should be:
30/ 50 cm, 12/ 20 inch.
510
163,3
510
Threads
M6
Interface
Mount
Ceiling
500mm
Figure 5-2. Ceiling mount
95
59,5
82,5
53
Ceiling Mount Interface
M6 Threads
163,3
500mm
www.projectiondesign.com