Grandstream Networks GXP21 Series User Manual page 29

Upgrade Via
Firmware Server Path
Config Server Path
Firmware File
Prefix/Postfix
Config File
Prefix/Postfix
Allow DHCP Option 43
and Option 66 to
override server
Automatic Upgrade
Authenticate Conf File
Enable TR-069
ACS URL
TR-069 Username
TR-069 Password
Save Credentials
Auto Login
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password
Authentication Method
Grandstream Networks, Inc.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
This field allows the user to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Defines the server path for provisioning; it can be different from the firmware server.
Default is blank. If configured, GXP21xx will request the firmware file with the
prefix/postfix and only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Default is blank. If configured, GXP21xx will request the config file with the
prefix/postfix and only the file with the matching encrypted prefix will be downloaded
and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Default is "Yes". This allows device gets provisioned from the server automatically.
This function is used by ITSP. End user should NOT touch these parameters.
Default is "No". Choose "Yes" to enable automatic HTTP upgrade and provisioning.
In "Check for upgrade every" field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to "No", the phone
will only perform HTTP upgrade and configuration check once at boot up.
Default is "No". If set to "Yes", configuration file would be authenticated before
acceptance. End user should use default setting.
Default is "No".
URL for TR-069 Auto Configuration Servers (ACS).
Enter username for TR-069.
Enter password for TR-069.
Save TR-069 credentials. Default is "No".
Auto Login TR-069 account. Default is "No".
Enable periodic inform. Default is "No".
When enabling periodic inform, set up the periodic inform interval.
Enter the connection request username.
Enter the connection request password.
Select the authentication method among "No authentication", "Basic" or Digest.
GXP21xx User Manual
Firmware version: 1.0.1.66
Page 28 of 41
Last Updated: 05/2011