Wireless Zone Sensor - Trane VAV VV550 LonTalk Installation & Operation Manual

Wireless Zone Sensor

Overview
The Trane Wireless Zone Sensor set includes a sensor and a receiver that work together to provide
the same functions as the equivalent Trane wired sensor, such as the standard 10 k temperature
input (with the exception of the communication jack). No further software or hardware is necessary
for site evaluation, installation, or maintenance.
The sensor transmits the zone temperature, all zone temperature setpoint functions, timed override
Occupied (On) and timed override Unoccupied (Cancel) information to the receiver. The receiver
electrically reproduces the zone temperature resistance, all zone temperature setpoint function
resistances, and timed override On and timed override Cancel information as sent by the sensor.
Dimensional Diagrams
See
dimensions are the same for both the sensor and the receiver.
Figure 9. Outside dimensions for sensor
VAV-SVP01A-EN
Figure 9, p. 27 and Figure 10, p. 28
4.78 in (12.14 cm)
VAV Start Up/Check Out Procedure
for dimensions of the Wireless Zone Sensor set. The
2.90 in (7.35 cm)
2.62 in (6.65 cm)
1.08 in (2.75 cm)
Note: The dimensions are the
same for both the sensor
and the receiver.
27