Restoring Factory Defaults; Restoring Everything To The Factory Default Settings - Zektor HDS4x2 User Manual

Restoring everything to the factory default settings

It's possible to reset the HDS4x2 back to its factory defaults.
WARNING: All preset programming will be lost! All newly learned IR codes will be lost!
Press and hold the Press and hold the
1 1
power toggle button . . . power toggle button . . .
To reset to factory defaults:
1. Press and hold the Power Toggle button
2. While continuing to hold the Power Toggle button, also press and hold the both the '2' and '3'
2
buttons .
3. Continue to hold these three buttons until the display flashes slowly 4 times.
The HDS4x2 will now be reset to factory default settings.
1
1 2 3
. . .while holding the power toggle, press and hold . . .while holding the power toggle, press and hold
2 2
both the '2' and '3' buttons . both the '2' and '3' buttons .
1
.

Restoring Factory Defaults

4 B/A
HDS4x2 User Guide, Rev 1.1, 08-31-07
HDS4x2
 