Table of Contents
Advertisement
91-000832_E5644B CIB_R4.qxd
Getting Started
Wall mounting
The base can be installed on any standard wall-phone outlet as shown below. Choose
a location away from electronic equipment, such as personal computers, computer
routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or mois-
ture.
1) Connect telephone line cord and
power adapter to telephone jacks
and wall jacks, as shown on page 7.
2) Install wall mount bracket onto the
set.
(a) First put the two front wall mount
bracket tabs into the front notches on
the bottom of the telephone base.
(b) Squeeze the rear tabs of the wall
mount bracket as you insert them
into the rear notches on the bottom of
the telephone base.
NOTE: To disassemble the wall
mount bracket, squeeze the rear tabs
while lifting up the wall mount bracket
back and away from the telephone base.
Plug power adapter
into electrical outlet.
3) Position the wall mount bracket over
the wall outlet mounting pegs, and
press and slide the wall mount
bracket down firmly so it is held
securely on the outlet mounting
pegs.
Plug telephone line
cord into telephone
cord wall jack.
2/13/1950
7:21 PM
b
9
Page 9
a
a
b
Advertisement
Table of Contents
