AT&T 5643B User Manual page 49

5.8 ghz cordless telephone/answering system
Hide thumbs Also See for 5643B:
Table of Contents

Advertisement

91-000832_E5644B CIB_R4.qxd
Appendix
Troubleshooting
Problem
CL flashes in
message win-
dow
Common cure
for electronic
equipment
2/13/1950
7:21 PM
Suggestion
Reset the clock in the answering system (see page 27).
If the unit is not responding normally, try putting the cordless hand-
set in the telephone base or the charger. If it does not seem to
respond, try the following (in the order listed):
Disconnect the power to the telephone base.
Disconnect the battery on the cordless handset and the spare bat-
tery in the telephone base.
Wait a few minutes before connecting power to the telephone base.
Re-install the battery pack and place the cordless handset into the
telephone base or charger.
Wait for the cordless handset to synchronize its connection with the
telephone base. To be safe, allow up to one minute for this to take
place.
47
Page 47

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5644b

Table of Contents