Wall Mounting - AT&T E2116 User Manual

2.4 ghz cordless telephone with caller id & call waiting

Hide thumbs Also See for E2116:

Table of Contents

Getting Started

Wall mounting

The line cord of the base unit can be plugged into any standard wall-phone outlet as

shown below. Choose a location away from electronic equipment such as personal com-

puters, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

Connect cords as shown on page 6, then press and slide the cords

down firmly so the base is held securely on outlet mounting pegs.

Plug power adaptor

into electrical outlet.

Plug telephone line

cord into telephone jack.

Install the line cord as

shown in the diagram.

Clip wall-mount bracket

securely into notches on

underside of base.

Table of Contents