Memory Full; Remote Access; Remote Access Commands - RCA 1114 User Manual

1. Press and hold the MEMO button. The unit announces, "Record your memo
after the tone."
2. Record your message after the beep.
3. Release MEMO when you're finished talking. The unit treats the memo as a
message, as the display shows.

Memory Full

When the unit's memory i s full, it answers after 10 rings and announces,
"Memory i s full." A 20-second waiting period follows, allowing you to enter
your security code.

Remote Access

You can access your answerer from any touch-tone phone from another
location by entering your 3-digit security code (the default security code is 1
2 3, but you can change it .) Be aware that remote functions do not work with
rotary or push-button pulse-dialing phones.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security
code. The unit confirms your code with a beep. To bypass the greeting, you
can enter your 3-digit security code any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security
code has been entered. Menu selections can be made while the menu is
playing.
NOTE: The unit answers on the 10th ring when it is turned off
or the memory is full. To access the answerer, enter the 3-digit
security code after the beep. If memory is full, play messages
and erase some of them to restore memory.
NOTE: After the unit plays the remote menu, it waits 20 seconds
for a command, then disconnects.

Remote Access Commands

Play messages
Repeat messages (during message playback)
Skip to next message (during message playback)
Erase message (during message playback)
Stop playback(during message playback)
Turn answerer On/Off
Review menu again
2
1
3
0
2
4
7