Configuring Your Modem/Router With The Setup Wizard; Running The Setup Wizard - Belkin ADSL2+ User Manual

Configuring your Modem/Router with the Setup Wizard

Running the Setup Wizard

1.
You can access the web-based management user interface of
the Modem/Router using the Internet browser on a computer
connected to the Modem/Router. Type "192.168.2.1" (do not type
in anything else such as "http://" or "www") in your browser's
address bar. Then press the "Enter" key.
Note: It is strongly recommended that you use a computer
physically connected to the Modem/Router with an RJ45 cable
for initial setup. Using a wirelessly connected computer for initial
setup is not recommended.
2.
The following screen will appear in your browser to prompt you
to login. The Modem/Router ships with no password entered. In
the login screen, leave the password blank and click the "Submit"
button to log in.
Note: It is strongly recommended that you change the password
to your own for increased security. Please read the following
section, entitled "Manually Configuring your Modem/Router", for
details on how to change your password and to reference other
security features.
19 19
1
2
3
4
5
6
7
8
9
10
11
12