Belkin ADSL2+ User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Network Router
  5. High Speed ADSL2+
  6. User manual

Belkin ADSL2+ User Manual

Adsl2+ modem with wireless g+ mimo router
Hide thumbs Also See for ADSL2+:
Table of Contents

Advertisement

Quick Links

Download this manual
Belkin Corporation Worldwide Headquarters
© 2006 Belkin Corporation. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and
AppleTalk are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries. The mark "Wi-Fi" is a registered mark of the Wi-Fi Alliance. .
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
Belkin Tech Support
1800-BELKIN (1800 235 546) - Australia
0800-BELKIN (0800 235 546) - New Zealand
501 West Walnut Street
Compton, CA 90220, USA
310-898-1100
310-898-1111 fax
ADSL2+ Modem
with Wireless
G+ MIMO Router
P75125au

Advertisement

Table of Contents
loading

Related Manuals for Belkin ADSL2+

Summary of Contents for Belkin ADSL2+

  • Page 1 Compton, CA 90220, USA 310-898-1100 310-898-1111 fax © 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

  • Page 2: Internet Access

    ADSL2+ Modem with Wireless G+ MIMO Router Network your computers and share your ADSL Internet access ������� ����� ����� ���� ����� �� ��� � � � ����� ������ �� ������� ������� ����� ���� User Manual F5D9630-4A...

  • Page 3: Table Of Contents

    Benefits of a Home Network ....... . 1 Advantages of a Belkin Wireless Network..... . 1 2 Make Sure You Have the Following .

  • Page 4: Introduction

    Introduction Thank you for purchasing the Belkin ADSL Modem with G + MIMO Wireless Router (the Modem/Router). In minutes you will be able to share your Internet connection and network your computers with your new Modem/Router. The following is a list of features that make your Modem/Router an ideal solution for your home or small office network.

  • Page 5: Make Sure You Have The Following

    Make Sure You Have the Following Package Contents • ADSL2+ Modem with Wireless G+ MIMO Router • RJ11 Telephone Cord • RJ45 Ethernet Networking Cable • Power Adapter • User Manual CD System Requirements • An active ADSL service with a telephone wall jack for connecting the Modem/Router •...

  • Page 6: Knowing Your Modem/Router

    Knowing your Modem/Router The Modem/Router is designed to be placed on a desktop. All of the cables exit from the rear of the Modem/Router for better organisation and utility. The LED indicators are easily visible on the front of the Modem/Router to provide you with information about network activity and status.
  • Page 7 Knowing your Modem/Router Knowing your Modem/Router WLAN Status LED The WLAN Status LED is solid GREEN when you enable the wireless LAN function. It flashes when the Modem/Router is transmitting or receiving data wirelessly. WLAN is off Green WLAN is up and connected Green - blinking When transmitting or receiving data ADSL LED...
  • Page 8 Knowing your Modem/Router Back Panel DSL Line This port is for connection to your ADSL line. Connect your ADSL line to this port. Ethernet Ports The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports are labelled 1 through 4. These ports correspond to the numbered LEDs on the front of the Modem/Router.

  • Page 9: Connecting Your Modem/Router

    Connecting your Modem/Router Connecting your Modem/Router Positioning your Modem/Router Your wireless connection will be stronger the closer your computer is to your Modem/Router. Typical indoor operating range for your wireless devices is between 30 and 60 metres. In the same way, your wireless connection and performance will degrade somewhat as the distance between your Modem/Router connected devices increases.

  • Page 10: Connecting Your Computers

    Connecting your Modem/Router Connecting your Computers Power off your computers and networking equipment. Connect your computer to one of the YELLOW RJ45 ports on the rear of the Router labelled “connections to your computers” by using an Ethernet networking cable (one Ethernet network cable is supplied).

  • Page 11: Connecting Your Adsl Line

    Connecting your Modem/Router Connecting your Modem/Router Connecting your ADSL Line Connection for the Modem/Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built- in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line.

  • Page 12: Connecting Your Router

    Connecting your Router Note: One RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the grey...

  • Page 13: Powering Up Your Modem/Router

    Connecting your Modem/Router Powering Up your Modem/Router Connect the supplied power adapter to the Modem/Router power-input plug labelled “Power”. Note: For safety and performance reasons, only use the supplied power adapter to prevent damage to the Modem/Router. After connecting the power adapter and the power source is turned on, the Modem/Router’s power icon.

  • Page 14: Setting Up Your Computers

    Setting Up your Computers In order for your computer to properly communicate with your Modem/ Router, you will need to change your computer’s “TCP/IP Ethernet” settings to “Obtain an IP address automatically/Using DHCP”. This is normally the default setting in most home computers. You can set up the computer that is connected to the ADSL Modem/ Router FIRST using these steps.
  • Page 15 You will also need to delete the Gateway address from the Gateway tab and DNS Configuration entries in order to properly be configured for connection to the Belkin Modem/Router. Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Modem/Router.
  • Page 16 Setting Up your Computers Set up the computer that is connected to the DSL Modem/Router by FIRST using these steps. You can also use these steps to add computers to your Modem/Router after the Modem/Router has been set up to connect to the Internet. Manually Configuring Network Adapters in Mac OS up to 9.x In order for your computer to properly communicate with your Modem/...
  • Page 17 Setting Up your Computers Setting Up your Computers If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Modem/Router. Close the window. If you made any changes, the following window will appear.
  • Page 18 Setting Up your Computers Manually Configuring Network Adapters in Mac OS X Click on the “System Preferences” icon. Select “Network” (1) from the “System Preferences” menu. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
  • Page 19 Setting Up your Computers Setting Up your Computers Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected.

  • Page 20: Recommended Web Browser Settings

    Setting Up your Computers Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browser’s settings to the recommended settings in this section.
  • Page 21 Setting Up your Computers Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet Options” page. Netscape Navigator 4.0 or Higher Start Netscape.

  • Page 22: Configuring Your Modem/Router With The Setup Wizard

    Configuring your Modem/Router with the Setup Wizard Running the Setup Wizard You can access the web-based management user interface of the Modem/Router using the Internet browser on a computer connected to the Modem/Router. Type “192.168.2.1” (do not type in anything else such as “http://” or “www”) in your browser’s address bar.
  • Page 23 Configuring your Modem/Router with the Setup Wizard Configuring your Modem/Router with the Setup Wizard The Setup Wizard will start automatically for express configuration (recommended), click “Next” to continue. The first step is to select your country and ISP, and click “Next”. If your country and/or ISP is not listed, select “Other Country”...
  • Page 24 Wireless Channel = Auto Security = off Note: Belkin strongly recommends that you enable wireless security to WEP or WPA and change SSID to something of your own. Please read the User Manual for details on levels of wireless security and how...

  • Page 25: Configuring Your Router With The Setup Wizard

    Configuring Your Router with the Setup Wizard Double-check the settings shown on the following screen. You can click “Back” to change the settings or click “Next” to confirm Note: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting.

  • Page 26: Manually Configuring Your Modem/Router

    Manually Configuring your Modem/Router Understanding the Web-Based User Interface The home page shows you a quick view of the Modem/Router’s status and settings. All advanced setup pages can be reached from this page. (10) Quick-Navigation Links You can go directly to any of the Modem/Router’s UI pages by clicking directly on these links.
  • Page 27 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Logging into the Modem/Router will take you to a separate login page where you will need to enter a password. When you are logged into the Modem/Router, you can make changes to the settings.

  • Page 28: Changing Lan Settings

    Manually Configuring your Modem/Router Changing LAN Settings All settings for the internal LAN setup of the Modem/Router can be viewed and changed here. Clicking on the header of the LAN tab will take you to the LAN tab’s header page. A quick description of the functions can be found here.
  • Page 29 Manually Configuring your Modem/Router Manually Configuring your Modem/Router LAN Settings IP Address The “IP address” is the internal IP address of the Modem/Router. The default IP address is “192.168.2.1”. To access the setup interface, type this IP address into the address bar of your browser.
  • Page 30 For this reason, you will not want the IP address to change. Local Domain Name The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can...

  • Page 31: Dhcp Client List

    Manually Configuring your Modem/Router Manually Configuring your Modem/Router DHCP Client List You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address the computer, the host name (if the computer has been assigned one), and the MAC address of the computer’s Network Interface...
  • Page 32 Manually Configuring your Modem/Router Connection Type From the “Connection Type” page, you can select one of these five connection types based on the instruction provided by your ISP: • PPPoE • PPPoA • Dynamic IP (1483 Bridged) • Static IP (IPOA) •...

  • Page 33: Setting Your Isp Connection Type To Pppoe Or Pppoa

    Manually Configuring your Modem/Router Manually Configuring your Modem/Router Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to access the network of your ISP for connecting to the Internet.
  • Page 34 Manually Configuring your Modem/Router Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISP’s network together. The Modem/Router will obtain an IP address automatically from your ISP’s DHCP server. 1. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here.
  • Page 35 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Setting your ISP Connection to Static IP (IPoA) This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides a fixed IP for your Modem/Router to connect to the Internet.
  • Page 36 DNS (Domain Name Server) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many ISPs do not require you to enter this information into the Modem/Router. The “Automatic from ISP” box should be checked if your ISP did not give you a specific DNS address.
  • Page 37 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Using Dynamic DNS The Dynamic DNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org offers, allowing your network computers to be more easily accessed from various locations on the Internet.

  • Page 38: Wireless

    Manually Configuring your Modem/Router Wireless The “Wireless” tab lets you make changes to the wireless network settings. From this tab, you can make changes to the wireless network name (SSID), operating channel, and encryption security settings. Channel and SSID 1. Changing the Wireless Channel There are a number of operating channels you can choose from.
  • Page 39 Manually Configuring your Modem/Router Manually Configuring your Modem/Router network adapter for information on making this change. 3. Using the ESSID Broadcast Feature For security purposes, you can choose not to broadcast your network’s SSID. Doing so will keep your network name hidden from computers that are scanning for the presence of wireless networks.

  • Page 40: Encryption/Security

    Manually Configuring your Modem/Router Encryption/Security Securing your Wi-Fi Network Here are a few different ways you can maximise the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home office, and small office user.
  • Page 41 Most of the new wireless equipment in the market today supports both 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After selecting either the “64-bit”...
  • Page 42 With this system, a radius server distributes the Network key to the clients automatically. This is typically found in a business environment. For a list of Belkin wireless products that support WPA, please visit our website at www.belkin.com/networking. WPA2 (WiFi Protected Access) WPA2 is the second generation of WPA based 802.11i standard.
  • Page 43 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA or WPA2 and make sure your wireless networking devices are sharing the same Network key.

  • Page 44: Wep Setup

    Manually Configuring your Modem/Router WEP Setup 64-Bit WEP Encryption Select “64-bit WEP” from the drop-down menu. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually. A hex (hexadecimal) key is a mixture of numbers and letters from A–F and 0–9.

  • Page 45: Wap Setup

    Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G + MIMO Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time.
  • Page 46 Manually Configuring your Modem/Router There are two types of WPA security: WPA-Personal (PSK) and WPA- Enterprise (RADIUS). WPA-Personal (PSK) uses a so-called Pre-Shared key as the security key. A Pre-Shared key is a password that is between eight and 63 characters long. It can be a combination of letters, numbers, and other characters.
  • Page 47 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Select “WPA-RADIUS” for Authentication For Encryption Technique, select “TKIP”. This setting will have to be identical on the clients that you set up Enter the IP address of the radius server into the “Radius Server”...
  • Page 48 IMPORTANT: You also need to ensure that all your wireless client cards / adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin Wireless cards have updated drivers available for download from the Belkin support site: www.belkin.com/ networking.

  • Page 49: Configuring Your Computer's Network Adapter To Use Security

    Networking Utility. Simply click on your wireless network name (SSID) from the Available Networks list and enter your Pre-Share Key (PSK). For more information please refer to Belkin Network Card’s user manual. Most computers can also be setup to work with the Modem/Router from Wireless Network Properties screen build-in your Microsoft Windows operating system.
  • Page 50 Manually Configuring your Modem/Router Connecting your Computer to a Wireless Network that Requires a 64-Bit or 128-Bit WEP Key Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card. Under the “Wireless Network Properties”...
  • Page 51 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Connecting your Computer to a Wireless Network that Requires WPA-PSK (no server) Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card.
  • Page 52 Under the “Authentication” tab, select the settings that are indicated by your network administrator. Click “OK” to save the settings. Setting Up WPA/WPA2 for a Non-Belkin Wireless Desktop and Wireless Notebook Cards For non-Belkin WPA Wireless Desktop and Wireless Notebook Cards that are not equipped with WPA/WPA2-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected...
  • Page 53 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Important: You also need to ensure that the wireless card manufacturer supports WPA/ WPA2 and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems: • Windows XP Professional •...

  • Page 54: Wireless Bridge

    Manually Configuring your Modem/Router Select “TKIP” or “AES” under “Data Encryption”. This setting will have to be identical to the Modem/Router that you set up. Important: Enter your Pre-Shared key. Type in your encryption key in the This can be from eight to 63 characters “Network Key”...

  • Page 55: Firewall

    Manually Configuring your Modem/Router Manually Configuring your Modem/Router Firewall Your Modem/Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack • Ping of Death (PoD) •...
  • Page 56 Manually Configuring your Modem/Router Virtual Servers Virtual servers allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Modem/Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be “seen”.
  • Page 57 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Client IP Filters The Modem/Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. To restrict Internet access to a single computer for example, enter a name of the filter in “Filter Name”...
  • Page 58 Manually Configuring your Modem/Router DMZ (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application.

  • Page 59: Utilities

    Manually Configuring your Modem/Router Manually Configuring your Modem/Router Utilities The “Utilities” screen lets you manage different parameters of the Modem/Router and perform certain administrative functions. Restart Router Sometimes it may be necessary to restart or reboot the Modem/ Router if it begins working improperly. Restarting or rebooting the Modem/Router will NOT delete any of your configuration settings.
  • Page 60 Manually Configuring your Modem/Router Restarting the Modem/Router to Restore Normal Operation Click the “Restart Router” button. The following message will appear. Click “OK” to restart your Modem/Router. Restore Factory Defaults Using this option will restore all of the settings in the Modem/Router to the factory (default) settings.
  • Page 61 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Saving/Backup Current Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
  • Page 62 Manually Configuring your Modem/Router When the save is complete, you will see the window below. Click “Close”. The configuration is now saved. Restore Previous Settings This option will allow you to restore a previously saved configuration. Click “Browse”. A window will open that allows you to select the location of the configuration file.
  • Page 63 Manually Configuring your Modem/Router Manually Configuring your Modem/Router Firmware Update From time to time, Belkin may release new versions of the Modem/ Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Modem/Router’s firmware to the latest...
  • Page 64 Manually Configuring your Modem/Router System Settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the UPnP function of the Modem/ Router. Setting or Changing the Administrator Password The Modem/Router ships with NO password entered.
  • Page 65 Internet and get a response. You cannot set the clock yourself. Enabling Remote Management Before you enable this advanced feature of your Belkin Modem/ Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Modem/Router’s settings from anywhere on the Internet.
  • Page 66 Click on the “Apply Changes” button to save your settings. Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Modem/Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Modem/Router’s firewall to be configured in a specific...

  • Page 67: Troubleshooting

    Troubleshooting Troubleshooting Problem: The ADSL LED is not on. Solution: Check the connection between the Modem/Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Modem/Router labelled “DSL Line”. Make sure the Modem/Router has power. The power LED the front panel should be illuminated.
  • Page 68 Solution: If you are unable to connect to the Internet from a wireless computer, please check the following items: Look at the lights on your Modem/Router. If you are using a Belkin Modem/Router, the lights should be as follows: •...
  • Page 69 Troubleshooting Troubleshooting Does the name of your wireless network appear in the results? Yes, my network name is listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, but my network name is listed”. No, my network name is not listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, and my network name is not listed”.
  • Page 70 SSID” is enabled. This setting is found on the Modem/Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem: My wireless network performance is inconsistent.
  • Page 71 Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Modem/Router or Belkin Access Point. Solution Log into your Wireless Modem/Router or access point. Open your web browser and type in IP address of the Wireless Modem/Router or access point.
  • Page 72 The “Advanced” button will allow you to view and configure more options of the Card. Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card.
  • Page 73 Download the patch here: http://www.microsoft.com/downloads/details.aspx?FamilyID=009d8425-ce2b- 47a4-abec-274845dc9e91&displaylang=en You also need to download the latest driver for your Belkin Wireless 802.11g Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products.
  • Page 74 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Modem/Router or Belkin Access Point for a home network. Solution: From the “Security Mode” drop-down menu, select “WPA-PSK (no server)”. For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up.
  • Page 75 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network. Solution: Clients must use the same key that the wireless Modem/Router or access point uses. For instance if the key is “Smith Family Network Key”...
  • Page 76 Click “OK, then “Apply” to save the settings. Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security and I am NOT using a Belkin Wireless Card for a home network. Solution: If you are NOT using a Belkin Wireless Desktop or Wireless Notebook Network Card and it is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch...
  • Page 77 Troubleshooting Troubleshooting For a home or small business user, select “WPA-PSK” under “Network Administration”. Note: Select WPA (with radius server) if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information.
  • Page 78 Troubleshooting...

  • Page 79: Technical Support Information

    Technical Support Information Technical Support Information Technical Support For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin.com/networking or contact: 877-736-5771 or 310-898-1100 ext. 2263 Europe: 00 800 223 55 460...

  • Page 80: Appendixes

    DNS is an acronym for Domain Name Server. A Domain Name Server is a server located on the Internet that translates URLs (Universal Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you...
  • Page 81 Appendixes Appendixes You have to double-click on a desktop icon other than your browser to get on the Internet. To set the Modem/Router to use PPPoE, type in your user name and password in the spaces provided. After you have typed in your information, click “Apply Changes”.

  • Page 82: Virtual Servers

    It scans the air for any available network and allows each computer to automatically select a network from the survey. This occurs if the computer’s SSID is set to “ANY”. Your Belkin Modem/Router can block this random search for a network. If you disable the “ESSID Broadcast”...
  • Page 83 Appendixes Appendixes specific application. Client IP Filters The Modem/Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers.
  • Page 84 Appendixes Administrator Password The Router ships with NO password entered. If you wish to add a password for more security, you can set a password from your Modem/Router’s web-based user interface. Keep your password in a safe place as you will need this password if you need to log into the Modem/Router in the future.
  • Page 85 Appendixes Appendixes UPnP UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Modem/Router’s firewall to be configured in a specific way to operate properly.

  • Page 86: Appendix B: Important Factors For Placement And Setup

    To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •...
  • Page 87 Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual.

  • Page 88: Appendix C: Internet Connection Setting Table

    These guidelines should allow you to cover the maximum possible area with your Wireless Modem/Router (or access point). Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point. 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important.
  • Page 89 Appendixes Country Connection VPI/VCI Encapsulation ISPs Protocol Europe France PPPoE 8/35 Various Germany PPPoE 1/32 T-Online, various Holland 1483 0/35 BBNed, XS4all Bridged 0/32 Versatel DHCP 0/34 Baby XL, Tiscali (start/ Surf/ Family/ Live) PPPoA 8/48 VC MUX KPN, Hetnet, HCCNet, Tiscali (lite/ Basis/Plus)

  • Page 90: Information

    Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D9630-4 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is...
  • Page 91 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 &...
  • Page 92 Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.

This manual is also suitable for:

F5d9630-4

Table of Contents