Connecting Your Router - Belkin ADSL2+ User Manual

Connecting your Router

Note: One RJ11 telephone cord is supplied. When inserting an
RJ11 plug, be sure the tab on the plug clicks into position to
ensure that it is properly seated.
3.
If you have a dedicated ADSL service telephone line with an RJ11
wall jack, simply connect a telephone cord from the wall jack
to the grey RJ11 port labelled "DSL line" on the back of your
Modem/Router.
4.
If you have an RJ45 wall jack for your ADSL service, connect an
RJ45-to-RJ11 converter to the wall jack. Then connect one end
of a telephone cord to the converter and the other end to the
RJ11 port labelled "DSL line" on the back of your Modem/Router.
9 9
1
2
3
4
5
6
7
8
9
10
11
12
grey