Belkin AC1000 DB User Manual

Belkin AC1000 DB User Manual

Wi-fi dual-band ac+ modem router

Advertisement

Wi-Fi® DUal-BanD aC+ MoDeM RoUteR
AC1000
User Manual
F9J1104 V1 8820nt01137uk Rev. A00
DB
English
Français
DEutsch
nEDErl anDs
Español
italiano
português
polsKi
ČEsK Y
sLOVENsK Y
MAGYAR
РУССКИЙ
БЪЛГАРСКИ
ROMÂNĂ
ΕΛ ΛΗΝΙΚ Α
türKçE

Advertisement

Table of Contents
loading

Summary of Contents for Belkin AC1000 DB

  • Page 1 Wi-Fi® DUal-BanD aC+ MoDeM RoUteR AC1000 English Français User Manual DEutsch nEDErl anDs Español italiano português polsKi ČEsK Y sLOVENsK Y MAGYAR РУССКИЙ БЪЛГАРСКИ ROMÂNĂ ΕΛ ΛΗΝΙΚ Α F9J1104 V1 8820nt01137uk Rev. A00 türKçE...
  • Page 2: Table Of Contents

    Enabling Auto Update on Your Belkin Router . . . . . . . . . . . . . . . . .
  • Page 3: Getting Started

    GeTTInG sTaRTed What’s in the box Initial setup AC1000 DB Wi-Fi Dual-Band AC+ Modem Router Power Modem --- Combined power supply and ADSL Modem with Where to Place Your Modem Router built-in bundled power and Ethernet cable (attached to router)
  • Page 4: How To Set It Up

    GeTTInG sTaRTed How to set It Up Connect Your aC1000 db Modem Router 1. Take the Router out of the box before removing the Power Modem. 2. Plug the Power Modem into a socket near your ADSL telephone line.
  • Page 5 GeTTInG sTaRTed 3. Unravel the bundle and connect the ADSL telephone cable. (ADSL filter may be required) 4. Insert CD to run the installer software. If CD does not launch automatically, find the setup program and open it. The setup software will configure your Internet connection and let you know when things are working...
  • Page 6: Run The Installer Software

    GeTTInG sTaRTed Run the Installer software If you have DSL, you may need a username and password from your Internet provider 1. Click the Setup icon on the CD menu.
  • Page 7 2. After a brief installation, the setup software will ask you for the network name and password from the network information card that is stored in the foot of your new Belkin Router. Store the card under the base of your Router for future reference.
  • Page 8 This may take a few minutes to complete. Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router. during setup you may be asked for additional information. You may need to enter a username and password provided by your ISP.
  • Page 9: Advanced Tools & Settings

    GeTTInG sTaRTed advanced Tools & settings After the initial setup is complete, you have the option to change settings like your network name, security type, and password. To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to change: network name &...
  • Page 10: The Belkin Router Manager

    To access the Router settings, click on the icon and select from the menu that appears. Video Mover The status of your Router is shown by the Belkin Router Manager icon, which closely mimics the light on the front of the Router. Check for Updates...
  • Page 11: Adding Computers To Your Network

    This may take a few minutes to complete. Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router. note: The setup software runs only on Windows and Mac OS X systems.
  • Page 12: Manual Setup

    Connect to Your Router When requested, please enter the password Retrieve the network ID card from the foot of your new Belkin Router. (security key) provided on the card. Take a moment to look at the light on the front of the Router. If it is solid blue, your Router was able to connect to the Internet automatically.
  • Page 13 GeTTInG sTaRTed Using the WPs button 1. Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “WPS,”...
  • Page 14 GeTTInG sTaRTed http://router/ Internet Status: Connected Manually set Up Your Internet Connection The status of your Internet connection is shown in the Use a browser to visit http://router/ upper right corner of the router homepage. The router homepage should appear. If after a few moments it says “Connected,”...
  • Page 15 GeTTInG sTaRTed Internet Status: Not Connected DHCP Client List Static Route Internet WAN Connection Type MAC Address Wireless Channel and SSID If not, select “Connection Type” from the menu on the left. If a password screen appears, press “Submit.”...
  • Page 16 GeTTInG sTaRTed dynamic/fixed IP (1483 bridge) Select “Dynamic/Fixed IP (1483 Bridge)” from the In most cases the IP address is dynamic, in which case all you need to do is menu that appears and press “Next.” enter the correct VPI and VCI values and select the correct encapsulation mode (check with your ISP if you are unsure), then click “Apply Changes.”...
  • Page 17 GeTTInG sTaRTed Internet Status: Connected If after a few minutes your Internet Status says “Connected,” you’re done! You can surf the Internet. PPPoe/PPPoa Connection Some ADSL providers require a PPPoE or PPPoA connection. Select either PPPoE or PPPoA (check with your ISP if you are unsure of which you need) and press “Next.”...
  • Page 18 GeTTInG sTaRTed Internet Status: Connected Enter the username and password supplied by your Internet If after a few minutes your Internet Status says “Connected,” provider, enter the correct VPI and VCI values, and select the you’re done! You can surf the Internet. correct encapsulation mode (check with your ISP if you are unsure of what VPI/VCI and encapsulation values to use).
  • Page 19: Connect Your Wireless Devices

    GeTTInG sTaRTed Connect Your Wireless devices android (phones and tablets) 1. Open the Settings app and select Wireless and Network. (iPhone, iPad, and iPod touch) 2. From there, select Wi-Fi to see the list of available networks. 1. Open the Settings app and select the Wi-Fi menu item. 3.
  • Page 20 GeTTInG sTaRTed Windows ® Your computer provides a menu of available wireless networks at the right end of the task bar. 1. Left-click on the icon that looks like signal strength bars. 2. Select your wireless network from the list. If asked, enter your network password (network key).
  • Page 21: Adding Usb Devices

    addITIOnal CaPabIlITIes adding Usb devices...
  • Page 22: Additional Capabilities

    You can manually check the status of your shared drive by visiting You can manually check the status of your printer by visiting the the USB Print and Storage Manager, found under the Belkin Router USB Print and Storage Manager, found under the Belkin Router...
  • Page 23 Router. When the light above the USB port is lit, your device is available to computers on your network. Computers running the Belkin USB Print and Storage Manager will be able to make use of the shared device by visiting the USB Print and Storage Manager, found under the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac).
  • Page 24 USB Print and Storage information card found under the foot of your Router. Manager is found in the Belkin Router Manager icon displayed A person using your guest network will be able to join in your system tray (Windows) or menu bar (Mac).
  • Page 25 addITIOnal CaPabIlITIes Media server Media Server sends media from a USB drive attached to your Router to any UPnP (Universal Plug-and-Play) or DLNA-compatible device on your network. These devices include certain gaming systems, televisions, Blu-ray players, and cell phones. There are several settings in the configuration page: When you click “Apply Changes,”...
  • Page 26 addITIOnal CaPabIlITIes There are four different filtering options: 1. Block malicious, adult, and other non-family-friendly sites 2. Block malicious and adult sites 3. Block malicious sites 4. No filters If you think that there is a site that should be added to the filtering list, you can submit a request at safeweb.norton.com.
  • Page 27: Intellistream Qos

    There are two ways to enable Intellistream: Run a speed Test: IntelliStream is a feature of Belkin routers that prioritizes video and gaming traffic for a better online entertainment experience. In order for IntelliStream to provide you the best media experience, your Router needs to know what your approximate Internet speeds are.
  • Page 28 addITIOnal CaPabIlITIes Once complete you will see the results. If your Internet speed is greater than 70Mbps when downloading, IntelliStream QoS will only improve your uploading experience.
  • Page 29 addITIOnal CaPabIlITIes Refresh – This will retest your Internet speed. Manual set – This will let you set your approximate Internet speeds. If you do not know your Internet speeds, call your ISP. When you click “Apply Changes,” your Router will save your changes. When you click “Apply Changes,”...
  • Page 30 addITIOnal CaPabIlITIes IPv6 Configuration A new version of Internet Protocol (IP) uses a 128-bit address to implement additional features that are not present in current IP addresses. Contact your ISP to inquire about their support for IPv6. Pass-Through Devices connected to your Router can talk to each other using native IPv6 packets, but information will be sent to all connected devices.
  • Page 31: Getting To Know Your Router

    GeTTInG TO KnOW YOUR ROUTeR Router front Panel b) Wi-fi Protected setup (WPs) light and button The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Router, see “Getting Started >...
  • Page 32: Back Panel

    GeTTInG TO KnOW YOUR ROUTeR back Panel C) Usb 2.0 Ports a) Modem (Wan) Connector d) Reset button USB printers, disks, and other Connect the Ethernet cable This button is used to restart USB devices plugged into these from the supplied Power your Router in rare cases when it ports will be shared on your Modem to this port.
  • Page 33: Power Modem

    GeTTInG TO KnOW YOUR ROUTeR Power Modem Upper Panel Lower Panel a) Power Modem status light a) Reset button This button is used to restart your Power Modem in rare cases when Power Modem’s status is shown by the light on the front. it functions incorrectly.
  • Page 34: Technical Details

    To save you the cost of adding IP addresses per computer in your house, belkin Router Monitor your Belkin Router uses Network Address Translation (NAT) technology, allowing you to share a single IP address across your network. The Belkin Router Monitor application helps you to monitor your Router’s status and change network settings.
  • Page 35: System Requirements

    TeCHnICal deTaIls system Requirements setup software A computer running Windows XP SP3 or higher, Windows ® Vista ® , or Windows 7; or Mac OS ® X v10.5 or above Router Minimum 1GHz processor and 512M BRAM ADSL/ADSL2/ADSL2+ broadband connection 600MB of free hard-drive space for installation At least one computer with: Installed network interface card and TCP/IP networking protocol...
  • Page 36: Using Your Router

    UsInG YOUR ROUTeR enabling auto Update on Your belkin Router The Router has the capability to automatically check for a newer version of firmware and alert you when it’s available. You can choose to download the new version or ignore it. By default this feature is disabled.
  • Page 37 UsInG YOUR ROUTeR 
 6. Select “Enable” by clicking the radio button and then click “Apply Changes” at the bottom of the screen. 4. Click on “System Settings” in the left-hand column under the “Utilities” heading. 5. Toward the lower-half side of the screen you will find “Auto Update Firmware Enabling”.
  • Page 38 1. Click on the blue Belkin Router Manager icon (right-click for Windows) in your system tray (Windows) or menu bar (Mac). 2. Select “Check for Updates” or “Update Available” from the menu.
  • Page 39: Updating The Router's Firmware Via The Web Interface

    Internet as this interface is built into the Router itself. setup steps: 1. Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.) 2.
  • Page 40 UsInG YOUR ROUTeR 4. Open a web browser on the computer. 5. In the address bar of the web browser, type “http://192.168.2.1” and press “Enter” on your keyboard. 6. Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.
  • Page 41 UsInG YOUR ROUTeR 9. Select the firmware file by left-clicking on it and then click the “Open” button in the lower-right corner of the window. This will take you back into the Router’s interface. 8. Click the “Browse” button toward the middle of the screen to search for the file you saved previously.
  • Page 42 UsInG YOUR ROUTeR 11. A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”. 12. A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the Router.
  • Page 43: Resetting The Router

    UsInG YOUR ROUTeR Resetting the Router Restoring Your Router to factory defaults Press and hold the “Reset” button for at least 10 seconds, Reset button – Red and then release it. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” The “Reset”...
  • Page 44: Restoring The Router To Default Settings Using The Web Interface

    UsInG YOUR ROUTeR Restoring the Router to default settings Using the Web Interface symptoms 3. Click “Login” in the upper right-hand corner of the page. The You need to restore the factory defaults using the web interface. Router does not ship with a password, so just click “Submit”. This may be because the Router is not performing as expected or you wish to remove all previously configured settings.
  • Page 45 UsInG YOUR ROUTeR 
 4. Click on “Restore Factory Defaults” in the left- 5. Click on the “Restore Defaults” button. hand column under the “Utilities” heading.
  • Page 46 UsInG YOUR ROUTeR 7. The Router will begin the restoring process. Once the restore is complete, the Router will reboot. note: This may take several minutes. Your Router has successfully been restored to its factory settings. 6. A warning box will open that says, “Warning: All your settings will be lost.
  • Page 47: Resetting The Power Modem

    UsInG YOUR ROUTeR Resetting the Power Modem Restoring Your Power Modem to factory defaults Press and hold the “Reset” button for at least 10 seconds, and then release it. The lights on the Power Modem will momentarily flash. Reset button – Red The “Power Modem”...
  • Page 48: Troubleshooting, Support, And Warranty

    TROUblesHOOTInG, sUPPORT, and WaRRanTY Troubleshooting belkin setup cannot find my Router. If Belkin Setup is not able to communicate with your Router during the installation process, please check the following items. The setup Cd does not automatically start. 1. Make sure that the wireless hardware on your If Belkin Setup does not run when you insert the CD-ROM, your computer is turned on, if available.
  • Page 49 I cannot browse the Web. The light on the front of my Router is blinking amber. If Belkin Setup is not able to connect the Router to 1. Make sure the Router is connected to the Power Modem with the Internet, please check the following items: an Ethernet cable via the Router’s one WAN (modem) port.
  • Page 50 Windows XP SP3 or complete the setup via a wired connection. 3. If you have a static connection, your ISP will have assigned you an IP address, subnet mask, and gateway address. Please re-run Belkin Setup and enter this information when a static connection is mentioned.
  • Page 51 TROUblesHOOTInG, sUPPORT, and WaRRanTY I can’t connect to the Internet wirelessly and my My wireless network performance is slow, inconsistent, network name is not listed in available networks. suffers from weak signal, or I’m having difficulty maintaining a VPn connection. 1.
  • Page 52 TROUblesHOOTInG, sUPPORT, and WaRRanTY limiting the wireless transmit rate—Limiting the wireless transmit I’ve installed this new Router and some of my network clients rate can help improve range and connection stability. Most wireless (computers, game consoles, etc.) are now unable to connect. cards have the ability to limit the transmission rate.
  • Page 53 TROUblesHOOTInG, sUPPORT, and WaRRanTY does the Router support Wireless Protected access (WPa) security? 5. Click “Apply Changes” to finish. Your wireless connection is now encrypted. Each computer using your wireless The Router ships with WPA/WPA2 security turned on. network will need to use the new key. Windows XP and some older network hardware may require a software update to support WPA/WPA2.
  • Page 54 TROUblesHOOTInG, sUPPORT, and WaRRanTY I am having difficulty setting up Wired equivalent 5. Click “Apply Changes” to finish. Your wireless activity is now encrypted. Privacy (WeP) security on my Router. Each computer using your wireless network will need to use the new key. 1.
  • Page 55 Please check that the driver is installed. 3. The Router supports FAT16, FAT32-, or NTFS-formatted 3. The printer may not be set to auto-connect. Via the Belkin Router disks. Disks in other formats will not appear in the Manager, open the USB Print and Storage Center.
  • Page 56 If not, try unplugging and re-plugging the device. Please check that the USB connector is firmly plugged into the Router. 2. Via the Belkin Router Manager, open the USB Print and Storage Center. Check that the device appears in the list of available devices.
  • Page 57: Technical Support

    TROUblesHOOTInG, sUPPORT, and WaRRanTY Technical support AUSTRIA 0820 200 766 www.belkin.com/de/networking/ NORWAY 81 50 0287 www.belkin.com/uk/networking/ www.belkin.com/nl/networking/ POLAND 00800 - 441 17 37 www.belkin.com/uk/networking/ BELGIUM 07 07 00 073 www.belkin.com/fr/networking/ PORTUGAL 707 200 676 www.belkin.com/uk/networking/ CZECH REPUBLIC 239 000 406 www.belkin.com/uk/networking/...
  • Page 58: Belkin International, Inc., Limited 2-Year Product Warranty

    In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.
  • Page 59 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin To get service for your Belkin product you must take the following steps: product and how to proceed with your claim. 1. Contact Belkin International, Inc., at the phone number Belkin reserves the right to review the damaged Belkin product.
  • Page 60 DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
  • Page 61: Regulatory And Safety Information

    Class B digital device, pursuant to the requirements of EN 55022 and EN 55024. These limits are designed to provide reasonable We, Belkin International, Inc., of Schiphol-Rijk, Netherlands, protection against harmful interference in a residential installation. declare under our sole responsibility that the device, F9J1104,...
  • Page 62: Europe - Eu Declaration Of Conformity

    This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, and the low-voltage Directive 2006/95/EC. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc For information on product disposal please refer to http://environmental.belkin.com...
  • Page 63 © 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. iPad, iPhone, iPod touch, Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, Internet Explorer, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 64 PR# 33909 File name MAN_F9J1104V1_8820-01137_RevA00 SKU# F9J1104V1 P#/mKTG# 8820-01137_RevA00 DeSiGneR(S) LYNETTE DaTe 07/09/12 VeRSiOn 02...

Table of Contents