Belkin ADSL2+ User Manual page 43

Manually Configuring your Modem/Router Manually Configuring your Modem/Router
Sharing the Same Network Keys
Most Wi-Fi products ship with security turned off. So once you have
your network working, you need to activate WEP or WPA or WPA2 and
make sure your wireless networking devices are sharing the same
Network key.
The Wireless G+ MIMO Desktop Network Card cannot access the
network because it is using a different Network key than the Network
key that is configured on the Wireless G+ MIMO Modem/Router.
Network key=
Wireless G Modem/Router
MyPassword
Changing the Wireless Security Settings
Your Modem/Router is equipped with WPA/WPA2 (Wi-Fi Protected
Access), the latest wireless security standard. It also supports the
legacy security standard, WEP (Wired Equivalent Privacy). By default,
wireless security is disabled. To enable security, you must first
determine which standard you want to use. To access the security
"Security" on the Wireless tab.
settings, click
Network key=
MyPassword
Network key=
MyPassword
Wireless G Notebook
Network Card
Network key=
WRONG Password
40 40
Wireless G Desktop
Network Card
Wireless G Desktop
Network Card