Stapling And Hole Punching - Oce im4530 Printing Manual

Enlarge/Reduce Printing
You can automatically enlarge or reduce a document image to fit a specified paper size, or man-
ually set the zoom ratio to enlarge or reduce the image.
Printing enlarged or reduced image to fit specified paper size
1
Display the General tab and select the document size on the "Origi-
nal Paper Size" drop down box. Then select the paper size that you
want to print at the "Print Paper Size" drop down box.
The document image is automatically enlarged or reduced depending on the original
paper size and print paper size.
2
Set any other print options you require and click [OK].
3
Click [OK] or [Print] to send the print job.
Enlarged or reduced image is printed to fit specified paper size.
Printing an enlarged or reduced image by specifying the zoom ratio
manually
1
Display the General tab and check the "Manual Scale" box. Then
enter the percentage of zoom ratio.
The zoom ratio can be set from 25% to 400% in units of 1%.
2
Set any other print options you require and click [OK].
3
Click [OK] or [Print] to send the print job.
Enlarged or reduced image is printed by specified zoom ratio.

Stapling and Hole Punching

You can staple and punch the paper.
Stapling is not available if a finisher is not installed.
Hole Punching is not available if a hole punch unit is not installed.
Printing with Extended Print Functionality 247