Oce im4530 Printing Manual page 238

5 Printing from Windows
- Hanging Finisher — Select this when the Hanging Finisher is installed.
- Job Separator — Select this when the Job Separator is installed.
- Offset Stacker — Select this when the Offset Stacker is installed.
- Saddle Stitch Finisher — Select this when the Saddle Stitch Finisher is installed.
3) Automatic Duplexing Unit (im2830 Series Only)
This sets whether or not the optional automatic duplexing unit is installed.
- None — Select this when the automatic duplexing unit is not installed.
- Installed — Select this when the automatic duplexing unit is installed.
4) Hole Punch Unit
This sets whether or not the optional hole punch unit is installed.
- None — Select this when hole punch unit is not installed.
- 2 Holes — Select this when the 2 hole punch unit is installed.
- 2/3 Holes — Select this when the 2/3 hole punch unit is installed.
- 4 Holes (F) — Select this when the 4 hole (F) punch unit is installed.
- 4 Holes (S) — Select this when the 4 hole (S) punch unit is installed.
5) Drawer 1/Paper Type
This sets the paper size and paper type set in the 1st drawer.
6) Drawer 2/Paper Type
This sets the paper size and paper type set in the 2nd drawer.
7) Drawer 3/Paper Type
This sets the paper size and paper type set in the 3rd drawer. This can be set only when the
3rd drawer is installed.
8) Drawer 4/Paper Type
This sets the paper size and paper type set in the 4th drawer. This can be set only when the
4th drawer is installed.
9) LCF/Paper Type
This sets the paper size and paper type set in the LCF. This can be set only when the LCF is
installed.
LCF is not available for some countries or regions.
10) Bypass Tray/Paper Type
This sets the paper type set in the Bypass Tray.
11) Memory
Select the size of memory installed. Only "32MB" can be selected.
12) Override Application Paper Settings
Check this to use the paper source setting in the printer driver rather than the application set-
ting.
13) Enable SNMP Communication
Check this to enable obtaining the configuration information from this equipment.
If you disable the SNMP Communication, the notification of the Document Monitor also will
be disabled.
14) [Update Now]
Click this to obtain the configuration information from this equipment immediately. This is
available only when "Enable SNMP Communication" is checked.
236 Setting Up Print Options